Discontinued
Model: np905
Call for pricing: 866.771.0266
Add flexibility to your customers' integration projects with the high-performance NEC NP905 projector, a model that features wired and wireless network capabilities. The NP905, which delivers remarkably bright, high-contrast images, features XGA (1024 x 768) native resolution, easy-to-use networking technologies and up to 3500 hours of lamp life (in ECO Mode™). With its multitude of advanced features, this model is ideal for corporate boardrooms, training facilities and education settings.
  • ECO Mode™ technology helps extend lamp life and lowers power consumption
  • Integrated RJ-45 connection allows for quick connection to the LAN
  • Automatic keystone correction technology instantly projects a square image, even when the projector is set up at a steep offset angle to the screen
  • 3000-lumen brightness enhances images for most applications
  • HQV™ technology delivers superior home theater video processing
  • Windows Network Projector function simplifies your ability to present from any computer, whether local or remote
  • Geometric Correction Tool allows you to easily project square images on non-flat screen surfaces without distortion
  • AutoSense™ automatically syncs with any computer signal and features one-touch image optimization.



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Native Resolution XGA 1024x768 Maximum Resolution UXGA 1600 x 1200
Contrast Ratio (typical) 500:1  

Synchronization Range

Horizontal (Analog/Digital) 15-108 kHz Vertical 48-120 Hz

Signal Compatibility/Connectivity

Supported Video Standards NTSC 4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM SD/HD Video Signal Compatibility 480p, 576i, 576p, 720p, 1080i, 1080p
PC Signal Compatibility SVGA, XGA, WXGA, WXGA+, SXGA, SXGA+, UXGA Macintosh Signal Compatibility Yes
Sync Compatibility Separate Sync / Composite Sync / Sync on G External Control RS-232, IR, Wired LAN
Input Terminals
RGB1(analog):
VGA 15-pin D-sub, Component video using ADP-CV 1E
RGB2(analog):
VGA 15-pin D-sub, Component video using ADP-CV 1E
RGB3(digital):
HDMI
Video 1:
RCA
Video 2:
S-Video
Video 3:
HDMI
Audio 1:
Mini stereo
Output Terminals
Audio Out:
Yes
Monitor Out:
VGA 15-pin D-sub

Power Consumption (typical)

On 310W / 260W / NA / NA Input Current 3.7A
Power Requirements 100-240V AC, 50/60 Hz  

Physical Specifications

Dimensions (WxHxD)
Product:
12.2 x 11.4 x 4.9 in. / 310 x 289 x 125mm
Weight
Net Weight:
8.2 lbs. / 3.7 kg

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Storage -14-122°F / -10-50°C

Limited Warranty (parts & labor)

90 Days.  Lamp warranty is 90 days or 500 hours, whichever comes first.  

Additional Features

  • Auto power on
  • ECO Mode technology
  • High-speed wireless
  • Computer-free presentations
  • Closed captioning
  • Variable audio out
  • Sleep timer
  • HQV™
  • Geometric correction
  • Direct power-off
  • Built-in wall color correction
  • Advanced AccuBlend
  • AutoSense
  • 3D Reform
  • Kensington lock slot
  • Image magnification
  • Discreet source keys
 

Optical

Display Technology 0.63" LCD w/ MLA Light Output(Lumens) 3000 normal
Lamp Type 210W AC Light Source Life 2500 hours normal / 3500 hours eco
Screen Size (diagonal) 21 to 300 in. / 0.53 to 7.6m Throw Ratio 1.5 to 1.8
Projection Distance 2.3 to 36.4 ft. / 0.7 to 11.1m Projector Angle 8.3 to 8.6° tele / 9.9 to 10.3° wide
Lens
Zoom:
1 to 1.2
Focus:
Manual
F number, fnumber:
F=1.7 to 2.07, f=18.9 to 22.7mm
Keystone Correction +/- 40° horizontal, +/- 30° vertical

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 35 dB normal / 29 dB eco
Regulations USA UL 1950 FCC Class B, Canada CSA 950 (C-UL), NOM Filterable 8.2

High-Speed Wireless
IEEE802.11b/g and improved circuitry provide wireless communication up to three times faster than available from previous models.
Geometric Correction
Allows you to project on spheres, cylinders, corner angles and more.
HQV™ Video Processing
A high-performance video processing/scaling system designed for computer signals as well as standard or high-definition video, this technology brings home-theater-quality images to meeting rooms and classrooms using pixel-based, motion-adaptive de-interlacing to remove undesirable motion.
Windows Networking
Displays multimedia files (.jpeg, .bmp, .png, .mpeg2 or .wmv9) in the Windows shared folder on a local network using the Viewer function—all without bringing your PC into the conference room.
Windows Remote Desktop
Allows you to control a networked computer by connecting a USB mouse and keyboard directly to the projector’s USB input.
ECO Mode™
Extends lamp life, lowers audible noise and reduces total cost of ownership.
Built-In Closed Captioning
Enables decoding and display of text information from a video.
3D Reform
Allows you to square the image by adjusting horizontally, vertically or diagonally when the projector cannot be placed parallel or perpendicular to the screen.
Wired Network Connection
Integrated RJ45 connection for quick connection to the LAN (10/100 base-T capability).
Picture-in-Picture
Allows two sources to be displayed on the screen at one time in either a picture-in-picture or side-by-side configuration.


Reviews

Computerworld Magazine Reviews NEC NP905 in Wi-Fi Roundup
Labs editor Brian Nadel praises the projector’s Wi-Fi link, USB port and freedom of motion.
Lighting It Up In Dark Conditions: NEC's NP905 Projector
Reviews Editor Ed Moltzen said that the projector was perfect in 17 measurements of performance with crisp, sharp images and calls it an "integration-class" device for its wired and wireless capabilities. The CRN Test Center recommends the NP905 with 5 stars on technical merit and 4 stars for its channel program.

Press

NEC DISPLAY SOLUTIONS INTRODUCES TWO POWERFUL NETWORK COMPATIBLE PROJECTORS
Full-featured Projectors Offer Advanced Features, High-Definition Images

Warranty Length: 90 Days.  Lamp warranty is 90 days or 500 hours, whichever comes first.

Limited Warranty


Discontinued
Advanced Exchange - Overnight Freight Service

Lamps

Discontinued
Replacement Lamp

Mounts/Mounts Accessories

Ceiling Mount
Discontinued
Ceiling Mount
Discontinued
Ceiling Plate
Refurbished
Discontinued
Adjustable Extension Column, 12"–18"
Refurbished
Discontinued
Adjustable Extension Column, 3'–5'
Refurbished
Ceiling Mount
Refurbished
Discontinued
Ceiling Mount
Refurbished
Discontinued
Ceiling Plate
Adjustable Extension Column, 2' - 3'
Adjustable Extension Column, 3' - 5'
Refurbished
Adjustable Extension Column, 2' - 3'
Refurbished
Adjustable Extension Column, 3' - 5'
Discontinued
Ceiling Mount
Adjustable Extension Column, 6" - 9"

Cases

Discontinued
Protective Shipping Case
Refurbished
Discontinued
Protective Shipping Case

Cables/Adapters

IR Receiver
Power Cable
RGB Signal Cable
Refurbished
IR Receiver
Refurbished
RGB Signal Cable

Replacement Remotes

Discontinued
Remote Control
Refurbished
Discontinued
Remote Control

Multimedia Projector Speakers

Refurbished
Discontinued
Self-Powered Speaker

Multimedia Projector Misc

Discontinued
Carts
Discontinued
Carts
Refurbished
Discontinued
Carts
Refurbished
Discontinued
Carts
Discontinued
Screens
Discontinued
Screens
Refurbished
Discontinued
Screens
Refurbished
Discontinued
Screens

  • Remote control
  • Batteries
  • Power cord
  • RGB signal cable
  • Lens cap
  • User manual
  • Quick Start Guide
  • Product registration card
  • Wired and wireless networking setup guide
  • IR remote control receiver
  • Attachable carrying handle

Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

Projectors

  • If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life.
  • Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control.
  • While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.
  • Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally.
  • In the projectors on screen menu select the Setup option.
  • Under setup go to Installation or Installation 1 in the sub menu.
  • Within installation you will need to select Orientation.
  • In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen.
This tip works for most NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:
NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCA type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
Function F* (this varies from computer to computer)
This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.

To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:

1. Go to the "Extended Menu" and choose "Projector Options."
2. Choose "Setup" and go to page 4.
3. Choose the checkbox "3D Reform Memory" and press OK.

Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.

The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.

To present your digital images or stills using an NEC projector you can use the following memory cards:

Compact flash cards (with a Type II PCMCIA CF adapter)
Smart media (with a 4-in-1 Type II adapter)
Memory stick (with a 4-in-1 Type II adapter)
Memory stick pro (with a 4-in-1 Type II adapter)
Multimedia card (with a 4-in-1 Type II adapter)
Secure digital (with a 4-in-1 Type II adapter)

The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PAL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PAL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
Check your projector's installation guide, or use our Image Calculator.

Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a screen vendor for screen recommendations.
Most lamps have an expected life of about 2000 hours.

There are several things you can do to increase your lamp life.

• Always make sure there is adequate clearance near the intake and exhaust vents.
• Keep the environment clean and relatively dust free.
• Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room.
• Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles.
• Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels.

Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also contact NEC Technical Support to have your lamp recycled by NEC Display Solutions.

For Windows XP (ver. 2.08):

LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Windows Vista (ver. 2.08):

LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Mac OS (Intel) (ver. 1.2.5)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

For Mac OS (PowerPC) (ver. 1.2.4)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

*The "Easy Connection" function cannot be used with VT800.

Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
Excessive moisture, dust, heat and smoke.
You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact NEC technical support or your local NEC service provider to set it up.
No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products

LT265
LT380
Contact Sales Contact Support