Model: np-px2000ul-47zl
Call for pricing: 866.771.0266
Think about projection technology in a whole new light! The NEC PX2000UL is a powerful installation projector with an RB laser light source that makes it perfect for all-new applications. With more consistent brightness, improved color fidelity, and roll free capabilities these projectors will deliver in new verticals such as retail, simulation, and theme park installations. Furthermore, the laser module delivers 20,000 hours of virtually maintenance-free operations, reducing your total cost of ownership!
  • Bundle includes NP47ZL standard Zoom Lens
  • High-brightness, lower power consumption enhance always-on capabilities of laser projection
  • Ideal for new applications such as digital signage
  • Lamp-less operation reduces TCO
  • Eco-friendly features, minimal maintenance and cost savings mean these projectors are still great for demanding integration applications such as higher education and corporate
  • Breath new life into older installations 20,000 lumens of brightness
  • Seamlessly blend multiple images with integrated edge blending capabilities
  • Built-in HDBaseT enabels simplified installations with a single cable for video, audio, and control signals.



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Aspect Ratio 16X10 Native Resolution WUXGA 1920x1200
Maximum Resolution WQXGA 2560 x 1600 Contrast Ratio (typical) 10,000:1 with Dynamic Black

Synchronization Range

Horizontal (Analog/Digital) Analog: 15-100kHz, Digital: 15-153kHz Vertical Analog: 48-120Hz, Digital: 24-120Hz

Signal Compatibility/Connectivity

Supported Video Standards NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM SD/HD Video Signal Compatibility 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
PC Signal Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA Macintosh Signal Compatibility Yes
Sync Compatibility Separate Sync / Composite Sync / Sync on G External Control RS-232, IR, HDBaseT, DDC/CI, RJ-45, USB (USB 2.0)
Input Terminals
RGB1(analog):
VGA 15 pin D-sub, Component video using ADP-CV1E adapter
RGB2(analog):
5BNC
RGB2(digital):
HDMI (V2.0) w/HDCP (V1.4/2.2)
RGB3(digital):
HDMI (V2.0) w/HDCP (V1.4/2.2)
RGB4(digital):
DisplayPort w/HDCP (V1.4)
RGB5(digital):
DVI-D w/HDCP (V1.4/2.2)
RGB6(digital):
HDBaseT w/HDCP (V1.4/2.2)
Output Terminals
Monitor Out:
VGA 15 pin D-sub

Power Consumption (typical)

On 1900W / TBD / TBD / TBD Power Consumption (max) 1900 W
Input Current 8.7A Power Requirements 200-240V AC, 50/60 Hz
Power Supply Voltage 200-240V AC, 50/60 Hz  

Physical Specifications

Dimensions (WxHxD)
Product:
20.9 x 29.4 x 9.8 in. / 530 x 748 x 248mm
External:
29.4 x 20.9 x 9.8 in. / 748 x 530 x 248mm
Shipping:
30.7 x 38.9 x 19.2 in. / 779 x 977 x 488 mm
Weight
Net Weight:
112.4 lbs. / 51 kg
Shipping:
146 lbs. / 66 kg

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Operating Humidity 10 to 85% Humidity (Non-Condensing)
Operating Altitude 0 to 4200 m (13,780 ft) Storage Temperature -4-140°F / -20-60°C
Storage Humidity 10% - 85% (non-condensing) Storage Altitude 0-4,200m / 0-13,780ft (above sea level)

Limited Warranty (parts & labor)

Registered owners receive a 5-year or 20,000 hours parts and labor warranty including InstaCare next business day exchange.  

Additional Features

  • Motorized Lenses
  • Manual Keystone Correction
  • Geometric Correction
  • Quick power on
  • ECO Mode Technology
  • DiCom Simulation
  • Edge Blending
  • Virtual Remote
  • NaViSet Administrator 2
  • Quick power-off
  • Advanced AccuBlend
  • AutoSense
 

Optical

Light Output(Lumens) 20000 (Center) Boost Mode Lumens Light Source Life 20,000 hours
Throw Ratio 0.9 to 1.2:1 ultra wide zoom lens / 1.2 to 1.56:1 short throw zoom lens / 1.5 to 2.0 standard zoom lens / 2.0 to 4.0:1 long throw zoom lens / 4.0 to 7.0 ultra long throw zoom lens Projection Distance 2.5 to 68.5 ft. / 0.74 to 20.9m
Projector Angle 10.3 to 10.8° tele / 13.7 to 14.5° wide Lens
Zoom:
Motorized
Focus:
Motorized
F number, fnumber:
(NP45ZL) F=2.2 to 2.53, f= 13.3 to 18.6mm, (NP46ZL) F=2.18 to 2.66, f= 21.8 to 49.8mm, (NP47ZL) F=2.17 to 2.65, f= 49.7 to 99.8mm, (NP48ZL) F=2.17 to 2.65, f= 49.7 to 99.8mm, (NP49ZL) F=2.2 to 2.57, f= 49.7 to 99.8mm
Keystone Correction +/- 60° horizontal, +/- 40° vertical  

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 45 dB normal / 43 dB eco
Regulations USA UL60950-1: 2nd edition,2014, FCC Part15 Subpart B(ANSI C63.4.2014), CAN/CSA C22.2 No.62368-1-14,2nd Edition,2014, ICES-003 Issue6(ANSI C63.4:2014) Optional Lenses Ultra Wide Zoom Lens 0.9-1.2 (NP45ZL), Short Throw Zoom Lens 1.2-1.56 (NP46ZL), Standard Zoom Lens 1.5-2.0 (NP47ZL), Long Throw Zoom Lens 2.0-4.0 (NP48ZL), Ultra Long Throw Zoom Lens 4.0-7.0 (NP49ZL)

Accessories

Optional
  • Remote Control (RMT-PJ37)
  • Ultra Wide Zoom Lens 0.9-1.2 (NP45ZL)
  • Short Throw Zoom Lens 1.2-1.56 (NP46ZL)
  • Standard Zoom Lens 1.5-2.0 (NP47ZL)
  • Long Throw Zoom Lens 2.0-4.0 (NP48ZL)
  • Ultra Long Throw Zoom Lens 4.0-7.0 (NP49ZL)
  • Ceiling Mount (NC1100CM)
  • Extension Column (AEC006009)
Extension Column (AEC012018)Extension Column (AEC0203)Extension Column (AEC0305)Power Cord (NP01PW1)RGB Signal Cable (RGBCBL-PJPX)
 

Primary Lenses

Ultra Wide Zoom Lens 0.9-1.2 (NP45ZL), Short Throw Zoom Lens 1.2-1.56 (NP46ZL), Standard Zoom Lens 1.5-2.0 (NP47ZL), Long Throw Zoom Lens 2.0-4.0 (NP48ZL), Ultra Long Throw Zoom Lens 4.0-7.0 (NP49ZL)  

Lens Adjustment Functions

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens  

Supported Screen Size (maximum)

40 to 500 in. / 1.02 to 12.7m  

DMD Specifications

DLP (0.96" DMD)  

Dual Computer Inputs
Ensures quick switching between presentations.
Edge Blending
Blend multiple projectors together to create not standard images
PIP/POP/Side-by-Side
Picture-in-picture (PIP) allows for a second frame within the screen area. Picture-on-picture (POP) surrounds the standard frame with multiple frames. Side-by-side places two sources adjacent to one another.
Power Zoom and Focus
Simplifies installation and operation by easily adjusting the lens through the remote control.
Dual HDMI inputs (with HDCP)
Ensure quick switching between presentations and allows for simultaneous digital connections of high-definition sources, such as Blu-ray players, cable boxes, satellite receivers and computers
AutoSense™
Intuitively syncs the projector with most computer signals and features one-touch image optimization.
Advanced AccuBlend™
Ensures detailed images when non-native resolution sources are connected to the projector.
Tilt-Free Installation
Allows the projector to be rotated freely (360°) in order to point up or down depending on the installation requirements.
Geometric Correction
Allows you to project on spheres, cylinders, corner angles and more.
Landscape/Portrait Capable
Allows for distortion-free display of content in various orientations, creating new application opportunities.
Portrait Mode
Ability to install a projector in its side to create a 10:16 portrait image
Variable Audio Out
Adjusts the volume of an external speaker system using the projector's remote control.
Crestron Roomview
Provides unified management, including the ability to switch the power on and off for multiple projectors connected to a network.
VORTEX Technology Plus
Improves white level, color accuracy, dynamic range and varying levels of black in an image.
Virtual Remote
Used over the VGA cable to control the projector directly from a computer without the need for additional control cables.
Lens Shift
Vertical and horizontal lens shift enables flexible projector placement.
Power Management
Enables projector to automatically turn off when an incoming signal is not detected from any of the inputs.
Direct Power Off
Protects the lamp when the projector is accidentally unplugged or the power strip is switched off. Enables the fan to continue running until the lamp is properly cooled down. Internal sensors monitor lamp temperature and prevent the lamp from powering on.
Quick Startup and Quick Power-Off
Allows users to begin presenting within 3 to 4 seconds and allows immediate power off with no cooling required after shutdown to ensure efficient energy usage.
Built-in Wall Color Correction
Presets provide for adaptive color tone correction to display properly on non-white surfaces.

Press

NEC DISPLAY INTRODUCES HIGH-BRIGHTNESS DLP PROJECTOR WITH RB LASER THAT DELIVERS SUPREME DETAIL AND COLOR REPRODUCTION
NEC NP-PX2000UL’s virtually maintenance-free, 24/7 operation gives users high bright projection, installation flexibility and functionality for multiple applications at an affordable price

Warranty Length: Registered owners receive a five (5) years or 20,000 hours (whichever comes first) parts and labor warranty including InstaCare next business day exchange.

Limited Warranty


Mounts/Mounts Accessories

Adjustable Extension Column, 12" - 18"
Ceiling Mount
Adjustable Extension Column, 6" - 9"
Adjustable Extension Column, 2' - 3'
Adjustable Extension Column, 3' - 5'
Refurbished
Adjustable Extension Column, 2' - 3'
Refurbished
Adjustable Extension Column, 3' - 5'
Discontinued
Ceiling Mount
Refurbished
Discontinued
Ceiling Mount

Replacement Remotes

Replacement Remote

Cables/Adapters

Replacement power cable
Refurbished
Replacement power cable
Discontinued
Component Video Adapter
Discontinued
BNC Adapter Cable
RGB Signal Cable
Refurbished
Discontinued
Component Video Adapter
Refurbished
RGB Signal Cable

Optional Lenses

0.9-1.2 Ultra Wide Zoom Lens (lens shift)
1.2-1.56 Short Throw Zoom Lens (lens shift)
1.5-2.0 Standard Zoom Lens (lens shift)
2.0-4.0Long Throw Zoom Lens (lens shift)
4.0-7.0 Ultra Long Throw Zoom Lens (lens shift)

  • Remote control
  • Batteries
  • Power cord
  • Cable cover
  • Lens hole cap
  • User manual
  • Quick Start Guide
  • Product registration card
  • Lens anti-theft screw
  • Security Sticker

Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

Projectors

  • If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life.
  • Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control.
  • While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.
  • Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally.
  • In the projectors on screen menu select the Setup option.
  • Under setup go to Installation or Installation 1 in the sub menu.
  • Within installation you will need to select Orientation.
  • In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen.
This tip works for most NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:
NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCA type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
Function F* (this varies from computer to computer)
This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.

To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:

1. Go to the "Extended Menu" and choose "Projector Options."
2. Choose "Setup" and go to page 4.
3. Choose the checkbox "3D Reform Memory" and press OK.

Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.

The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.

To present your digital images or stills using an NEC projector you can use the following memory cards:

Compact flash cards (with a Type II PCMCIA CF adapter)
Smart media (with a 4-in-1 Type II adapter)
Memory stick (with a 4-in-1 Type II adapter)
Memory stick pro (with a 4-in-1 Type II adapter)
Multimedia card (with a 4-in-1 Type II adapter)
Secure digital (with a 4-in-1 Type II adapter)

The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PAL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PAL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
Check your projector's installation guide, or use our Image Calculator.

Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a screen vendor for screen recommendations.
Most lamps have an expected life of about 2000 hours.

There are several things you can do to increase your lamp life.

• Always make sure there is adequate clearance near the intake and exhaust vents.
• Keep the environment clean and relatively dust free.
• Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room.
• Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles.
• Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels.

Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also contact NEC Technical Support to have your lamp recycled by NEC Display Solutions.

For Windows XP (ver. 2.08):

LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Windows Vista (ver. 2.08):

LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Mac OS (Intel) (ver. 1.2.5)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

For Mac OS (PowerPC) (ver. 1.2.4)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

*The "Easy Connection" function cannot be used with VT800.

Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
Excessive moisture, dust, heat and smoke.
You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact NEC technical support or your local NEC service provider to set it up.
No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products
Contact Sales Contact Support