Discontinued
Model: np-pa621x-13zl
$2,654.00 USD
NEC's PA621X is a 6200 lumen advanced professional installation model that appeases corporate and higher education users. With integrated RJ45, optional high-speed wireless (LAN IEEE 80.11b/g/n) and a multitude of simple-to-use asset management technologies, the PA621X helps users present seamlessly without worrying about their technology. Enjoy design and installation flexibility with a complete line of optional bayonet style lenses, tilt-free and portrait installation capabilities along with horizontal/vertical lens shift.
  • TileMatrix enables 4Kx2K resolution utilizing 4 projectors via external distribution amplifier
  • Multi-display support with Picture by Picture/Picture Out Picture
  • High performance video processing/scaling creates life-like images
  • Integrated software applications such as Crestron Roomview, AMX Beacon and PJ link allow for complete interactivity and control
  • 6200-lumen brightness enhances images for most applications



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Native Resolution XGA 1024x768 Maximum Resolution 4K 4096 x 2160
Contrast Ratio (typical) 5000:1 with auto iris  

Synchronization Range

Horizontal (Analog/Digital) Analog: 15-100kHz, Digital: 15-153kHz Vertical Analog: 48-120Hz, Digital: 24-120Hz

Signal Compatibility/Connectivity

Supported Video Standards NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM SD/HD Video Signal Compatibility 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
PC Signal Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA, WQXGA, 4K Macintosh Signal Compatibility Yes
Sync Compatibility Separate Sync / Composite Sync / Sync on G External Control RS-232, IR, DDC/CI, USB
Input Terminals
RGB1(analog):
VGA 15-pin D-sub
RGB2(analog):
5-BNC
RGB3(digital):
HDMI w/HDCP
RGB4(digital):
HDMI w/HDCP
RGB5(digital):
DisplayPort w/HDCP
Audio 1:
Mini stereo
Audio 2:
Mini stereo
Output Terminals
Audio Out:
1/8 in. stereo (Variable audio out)
Monitor Out:
HDMI

Power Consumption (typical)

On 463W / 377W / 4.7W / 0.11W Input Current 5.1-2.1A
Power Requirements 100-240V AC, 50/60 Hz  

Physical Specifications

Dimensions (WxHxD)
Product:
19.7 x 14.4 x 6.5 in. / 499 x 366 x 164mm
Weight
Net Weight:
18.5 lbs. / 8.4 kg

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Storage -14-122°F / -10-50°C

Limited Warranty (parts & labor)

3 years.  Lamp warranty is 1 year or 500 hours, whichever comes first.  

Additional Features

  • Automatic keystone correction
  • Optional Wireless LAN
  • Active Lens Cover
  • USB Viewer
  • Cornerstone
  • Geometric Correction
  • 4000 hour Filter Life
  • Auto power on
  • ECO Mode technology
  • Closed captioning
  • Variable audio out
  • Carbon savings meter
  • Virtual Remote
  • Sleep timer
  • Quick power-off
  • Built-in wall color correction
  • Advanced AccuBlend
  • AutoSense
 

Optical

Display Technology 0.79" LCD w/ MLA Light Output(Lumens) 6200 normal
Lamp Type 330W AC Light Source Life 3000 hours normal / 4000 hours eco
Screen Size (diagonal) 40 to 500 in. / 1.02 to 12.7m Throw Ratio 1.5 to 3.02
Projection Distance 2.5 to 68.5 ft. / 0.74 to 20.9m Projector Angle 10.3 to 10.8° tele / 13.7 to 14.5° wide
Lens
Zoom:
1 to 2.01
Focus:
Manual
F number, fnumber:
F=1.7 to 2.37, f=24.4 to 48.6mm
Keystone Correction +/- 40° horizontal, +/- 40° vertical

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 39 dB normal / 33 dB eco
Regulations USA UL 1950 FCC Class B, Canada CSA 950 (C-UL), NOM  

Warranty Length: 3 years.  Lamp warranty is 1 year or 500 hours, whichever comes first.

Discontinued
Advanced Exchange - Overnight Freight Service

Multimedia Projector Misc

Refurbished
Wireless LAN Module
3D Glasses
RF Transmitter
Wireless LAN Module
Discontinued
Input Panel Cover

Large Screen Display Misc

MultiPresenter Stick
  • Simple device PIN# access for secure connectivity
  • Screen mirroring for Android and Windows devices
  • Includes a simple annotation software allowing for user collaboration
  • Run apps and share files easily

Cables/Adapters

Refurbished
RGB Signal Cable
RGB Signal Cable
Power Cable

Lamps

Replacement Lamp

Mounts/Mounts Accessories

Refurbished
Ceiling Plate
Ceiling Plate
Adjustable Extension Column, 2' - 3'
Adjustable Extension Column, 12" - 18"
Adjustable Extension Column, 3' - 5'
Refurbished
Discontinued
Ceiling Mount
Adjustable Extension Column, 6" - 9"
Discontinued
Ceiling Mount
Refurbished
Adjustable Extension Column, 3' - 5'
Refurbished
Adjustable Extension Column, 2' - 3'

Optional Lenses

1.46 - 3.02:1 Zoom Lens (lens shift)
Refurbished
1.50 – 3.0:1 Zoom Lens (lens shift)

Replacement Remotes

Replacement Remote

  • Remote control
  • Batteries
  • Power cord
  • Built-in Lens cover
  • User manual
  • Quick Start Guide
  • Product registration card
  • Lens anti-theft screw

Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

Projectors

  • If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life.
  • Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control.
  • While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.
  • Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally.
  • In the projectors on screen menu select the Setup option.
  • Under setup go to Installation or Installation 1 in the sub menu.
  • Within installation you will need to select Orientation.
  • In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen.
This tip works for most NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:
NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCA type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
Function F* (this varies from computer to computer)
This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.

To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:

1. Go to the "Extended Menu" and choose "Projector Options."
2. Choose "Setup" and go to page 4.
3. Choose the checkbox "3D Reform Memory" and press OK.

Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.

The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.

To present your digital images or stills using an NEC projector you can use the following memory cards:

Compact flash cards (with a Type II PCMCIA CF adapter)
Smart media (with a 4-in-1 Type II adapter)
Memory stick (with a 4-in-1 Type II adapter)
Memory stick pro (with a 4-in-1 Type II adapter)
Multimedia card (with a 4-in-1 Type II adapter)
Secure digital (with a 4-in-1 Type II adapter)

The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PAL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PAL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
Check your projector's installation guide, or use our Image Calculator.

Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a screen vendor for screen recommendations.
Most lamps have an expected life of about 2000 hours.

There are several things you can do to increase your lamp life.

• Always make sure there is adequate clearance near the intake and exhaust vents.
• Keep the environment clean and relatively dust free.
• Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room.
• Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles.
• Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels.

Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also contact NEC Technical Support to have your lamp recycled by NEC Display Solutions.

For Windows XP (ver. 2.08):

LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Windows Vista (ver. 2.08):

LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Mac OS (Intel) (ver. 1.2.5)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

For Mac OS (PowerPC) (ver. 1.2.4)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

*The "Easy Connection" function cannot be used with VT800.

Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
Excessive moisture, dust, heat and smoke.
You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact NEC technical support or your local NEC service provider to set it up.
No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products

NP-PA600X-13ZL
Contact Sales Contact Support