Model: np-p605ul
$3,689.00 USD
The NEC P605UL Entry Installation Series, LCD, laser projector combines advanced features at a budget conscious price making it ideal for higher education classrooms and corporate conference rooms. With 6000 lumens, WUXGA resolution and improved color fidelity the P Series delivers impressive images in demanding applications. Installation flexibility is achieved with lens shift, HDBaseT, a broad 1.6x zoom lens and tilt free capability. The 20,000 hour laser life and NEC's sealed optical engine creates a maintenance free projection solution.

  See how NEC has been an advocate for improving education for over 15 years. Click here for more details!
House of Worship Promotion!
House of Worship Promotion!
Take advantage of discounts for House of Worship customers
Valid 10/1/19 - 9/30/20
Buy 10 Projectors, Get 1 Free!
Buy 10 Projectors, Get 1 Free!
Purchase 10 of the same model or Mix-&-Match any combination of 10 projectors
Valid 4/1/20 - 3/31/21
  • Sealed optics provide a maintenance free projection solution while LCD technology delivers an impressive and accurate image
  • Horizontal & Vertical lens shift enables flexible projector placement
  • Built-in HDBaseT provides simplified installations with a single cable for video, audio, and control signals
  • Extremely quiet operation for minimal distraction
  • Powerful 20W speakers provide volume needed for most large classrooms and conference rooms
  • 4K Ready - Display stunning 4K 30Hz content using NEC’s proprietary high performance video processing/scaling chip
  • Eco-friendly features, minimal maintenance and a cost saving design mean these projectors are great for demanding applications in higher education and corporate
  • MultiPresenter for audio and video transmission from up to 16 sources simultaneously to the projector over the network
  • NaViSet Administrator 2: Free software solution that greatly eases administration and management of larger display device installations
  • Industry leading 5 year standard warranty on parts and labor! This includes InstaCare FREE!



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Aspect Ratio 16x10 Native Resolution WUXGA 1920x1200
Maximum Resolution Up to 4K@30Hz (3840x2160) with Advanced AccuBlend Contrast Ratio (typical) 600,000:1 with Light Adjust

Synchronization Range

Horizontal (Analog/Digital) 15 to 100KHz (RGB: 24kHz or over) Vertical 50-120 Hz

Signal Compatibility/Connectivity

Supported Video Standards NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL-60/SECAM SD/HD Video Signal Compatibility 4K, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
PC Signal Compatibility VGA, SVGA, XGA, WXGA, Quad-VGA, SXGA, SXGA+, WXGA+, WXGA++, WSXGA+, WUXGA Macintosh Signal Compatibility Yes
External Control RS-232 (D-Sub 9pin), IR, RJ45 Input Terminals
RGB1(analog):
VGA 15-pin D-sub
RGB2(digital):
HDMI w/ HDCP (v1.4)
RGB3(digital):
HDMI w/ HDCP (v1.4)
RGB4(digital):
HDBaseT
Audio 1:
Stereo Mini Jack
Output Terminals
Audio:
Stero Mini Jack
Audioout:
Stereo Mini Jack (variable)
 

Power Consumption (typical)

On 367W / 261W / 1.4W / 0.13W Input Current 5.5A - 2.3A
Power Requirements 100-240V AC, 50/60 Hz  

Physical Specifications

Dimensions (WxHxD)
Product:
18.9 x 16.0 x 5.6 in. (480 x 407 x 142.5 mm)
Shipping:
23.3 x 19.3 x 10.2 in. (591 x 491 x 259 mm)
Weight
Net Weight:
21.4 lbs. (9.7 kg)
Shipping:
28.2 lbs. (12.8 kg)

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Storage 14° – 122°F / -10° – 50°C

Limited Warranty (parts & labor)

Registered owners receive a 5-year or 20,000 hours parts and labor warranty including InstaCare next business day exchange.  

Additional Features

  • 4K Ready
  • Manual keystone correction
  • Wireless LAN
  • USB Viewer
  • Auto power on
  • ECO Mode technology
  • Variable audio out
  • Carbon savings meter
  • Virtual Remote
  • Picture-in-Picture
  • Built-in wall color correction
  • Advanced AccuBlend
  • AutoSense
 

Optical

Display Technology 0.64" LCD w/ MLA Light Output(Lumens) 6000 lumens
Lamp Type Laser/Phosphor Light Source Life 20,000 hours
Screen Size (diagonal) 25 - 300 in. / 0.6 - 7.6m Throw Ratio 1.23-2.0:1
Projection Distance 2.6 - 44.3 ft. / 0.8 - 13.5m Projector Angle 0 - 10.8° tele / 0 - 17.0° wide
Lens
Zoom:
1.6x
Focus:
Manual
F number, fnumber:
F=1.5~2.1 / f=17.2~27.6mm
Keystone Correction +/- 30° horizontal, +/- 30° vertical

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 28dB (HIGH BRIGHT) / 25dB (OTHERS) / 19dB (ECO)
Regulations UL60950-1:2nd edition,2014, UL62368-1:2nd Edition, FDA, Proposition65, TPCH, CAN/CSA C22.2 No.60950-1-07,2nd Edition,2014, ICES-003 Issue6(ANSI C63.4:2014)  

Crestron Roomview
Provides unified management, including the ability to switch the power on and off for multiple projectors connected to a network.
Carbon Savings Meter
Calculates the positive effects of operating the projector in ECO Mode, which is encouraged by an optional message at startup. A green ECO Mode button on the remote control makes the switch easy.
Dual HDMI inputs (with HDCP)
Ensure quick switching between presentations and allows for simultaneous digital connections of high-definition sources, such as Blu-ray players, cable boxes, satellite receivers and computers
AutoSense™
Intuitively syncs the projector with most computer signals and features one-touch image optimization.
Auto Power On
Powers on the projector as soon as it is plugged into a power outlet.
20W Audio
Powerful 20-watt speaker provides volume needed for large rooms
Landscape/Portrait Capable
Allows for distortion-free display of content in various orientations, creating new application opportunities.
Portrait Mode
Ability to install a projector in its side to create a 10:16 portrait image
Advanced AccuBlend™
Ensures detailed images when non-native resolution sources are connected to the projector.
Tilt-Free Installation
Allows the projector to be rotated freely (360°) in order to point up or down depending on the installation requirements.
Wired Network Connection
Integrated RJ45 connection for quick connection to the LAN (10/100 base-T capability).
Lens Shift
Vertical and horizontal lens shift enables flexible projector placement.
Remote Diagnostics
Enables the user to monitor and make adjustments to the projector from a remote location.
Dust-Resistant Design
Sealed optical block minimizes the effects of dust, helping to ensure the delivery of crisp, distortion-free images.
ECO Mode™
Extends lamp life, lowers audible noise and reduces total cost of ownership.
Wireless LAN (Optional)
Allows you to transmit images from a PC wirelessly to the projector, eliminating the need for traditional cumbersome cables.

Awards

Worship Facilities WFX New Product Award
NEC Winners include the FA Series dvLED and, NP-P605UL Projector

Press

NEC DISPLAY SOLUTIONS ADDS 6,000-LUMEN, ULTRA-QUIET OPTION TO POPULAR P SERIES OF ENTRY-LEVEL LASER PROJECTORS
New Whisper Quiet P605UL offers customers the quietest entry-level installation laser projector on the market, featuring a filter-free and maintenance-free design

Media

NEC Display Solutions Adds 6,000-Lumen, Ultra-Quiet Option to Popular P Series of Entry-Level Laser Projectors
Digital Signage Connection covers the announcement of the new P605UL projector.
NEC Display Solutions Adds 6,000-Lumen Option P Series of Entry-Level Laser Projectors
Boxoffice Pro covers the announcement of the new P605UL projector.
NEC unveils ‘the quietest 6,000-lumen projector’ w/ 4K, a 20,000-hour lifespan
9to5Toys covers the announcement of the new P605UL projector, and dives into the new features and how the projector stacks up against the competition -- noting that the P605UL produces a brighter image than Epson and other key competitors.
NEC Display Solutions Adds 6,000-Lumen, Ultra-Quiet Option to Popular P Series of Entry-Level Laser Projectors
Aviation Pros covers the announcement of the new ultra-quiet P605UL projector.
NEW PRODUCT: NEC P605UL WUXGA 3LCD Laser Projector
Projector Central dives in to the new features of the newest addition to the NEC P-Series.
NEC Display Adds 6,000-Lumen, Ultra-Quiet Option to P Series of Projectors
AV Network dives into the new P605UL and what makes this new model unique.
NEC Display Solutions adds 6,000-lumen, ultra-quiet option to P Series of entry-level laser projectors
eSchool News covers the announcement of the new NEC P605UL ultra-quiet projector.
NEC Display Adds 6,000-Lumen, Ultra-Quiet Option to P Series of Projectors
Sound & Video Contractor covers the release of the new ultra-quiet P605UL projector.
NEC Ships Quietest Laser Projector Ever
NEC Display is now shipping the 6,000-lumen P605UL entry-level installation laser projector equipped with whisper quiet technology.
NEC P Series Laser Projectors: Groundbreaking has never been this quiet
AV-IQ highlights the NEC P Series Laser Projectors in a video, detailing its features of being a maintenance-free solution with impressive visualization.

Warranty Length: Registered owners receive a 5-year or 20,000 hours parts and labor warranty including InstaCare next business day exchange.

Mounts/Mounts Accessories

Adjustable Extension Column, 6" - 9"
Ceiling Mount
Ceiling Mount
Ceiling Plate
Discontinued
Adjustable Extension Column, 12"–18"
Discontinued
Adjustable Extension Column, 2'–3'
Discontinued
Adjustable Extension Column, 3'–5'
Refurbished
Discontinued
Adjustable Extension Column, 12"–18"
Refurbished
Discontinued
Adjustable Extension Column, 2'–3'
Refurbished
Discontinued
Adjustable Extension Column, 3'–5'
Refurbished
Ceiling Mount
Refurbished
Ceiling Plate

Cables/Adapters

IR Receiver
Refurbished
IR Receiver
Wireless LAN Adapter

Replacement Remotes

Replacement Remotes

  • Remote control
  • Batteries
  • Power cord
  • RGB signal cable
  • User manual
  • Quick Start Guide
  • Important Info
  • Product registration card
  • Security Stricker

Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

Projectors

  • If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life.
  • Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control.
  • While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.
  • Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally.
  • In the projectors on screen menu select the Setup option.
  • Under setup go to Installation or Installation 1 in the sub menu.
  • Within installation you will need to select Orientation.
  • In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen.
This tip works for most NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:
NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCA type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
Function F* (this varies from computer to computer)
This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.

To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:

1. Go to the "Extended Menu" and choose "Projector Options."
2. Choose "Setup" and go to page 4.
3. Choose the checkbox "3D Reform Memory" and press OK.

Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.

The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.

To present your digital images or stills using an NEC projector you can use the following memory cards:

Compact flash cards (with a Type II PCMCIA CF adapter)
Smart media (with a 4-in-1 Type II adapter)
Memory stick (with a 4-in-1 Type II adapter)
Memory stick pro (with a 4-in-1 Type II adapter)
Multimedia card (with a 4-in-1 Type II adapter)
Secure digital (with a 4-in-1 Type II adapter)

The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PAL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PAL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
Check your projector's installation guide, or use our Image Calculator.

Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a screen vendor for screen recommendations.
Most lamps have an expected life of about 2000 hours.

There are several things you can do to increase your lamp life.

• Always make sure there is adequate clearance near the intake and exhaust vents.
• Keep the environment clean and relatively dust free.
• Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room.
• Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles.
• Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels.

Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also contact NEC Technical Support to have your lamp recycled by NEC Display Solutions.

For Windows XP (ver. 2.08):

LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Windows Vista (ver. 2.08):

LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Mac OS (Intel) (ver. 1.2.5)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

For Mac OS (PowerPC) (ver. 1.2.4)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

*The "Easy Connection" function cannot be used with VT800.

Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
Excessive moisture, dust, heat and smoke.
You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact NEC technical support or your local NEC service provider to set it up.
No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products
Contact Sales Contact Support