Model: nc1802ml-ims
Call for pricing: 866.771.0266
Designed for theaters with screens (up to 62.3 ft. wide), NEC's NC1802ML is the latest DCI compliant B Laser DLP cinema projector. Delivering precise 2K (2048 x 1080) resolution, 3-D capabilities and high contrast images (2000:1), this model is easy to operate, extremely user-friendly and requires minimal maintenance providing up to 50,000* hours of laser life for unsurpassed TCO. The optional all-in-one Integrated Media Server (IMS) with 2 TB RAID5 of storage offers versatile connectivity, while reducing the number of peripheral devices needed.
  • 3D content utilizes the projector's full 2K resolution and triple flash technology for smooth motion
  • Lamp free projector uses an B laser module
  • Approximately 50,000* hours of expected usage of the laser and DMD (depends on environmental conditions)
  • Direct selection buttons for eight stored projector configurations
  • Projector can be controlled from an optional touchscreen
  • Auto brightness control maintains constant brightness by adjusting the laser power as it ages
  • Complete line of (6) bayonet-style lenses with electronic zoom, focus and lens shift
  • Memory functions for lens position and light output simplify frequent operation



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Native Resolution 2K 2048x1080 Maximum Resolution 4K 4096 x 2160
Contrast Ratio (typical) 2,000:1 Lifetime 2 years / 30,000 hours

Synchronization Range

Horizontal (Analog/Digital) 15-100kHz (RGB: 24kHz or over) Vertical 50-120Hz

Signal Compatibility/Connectivity

External Control 2 × RJ45 (4 GPI and 6 GPO); 3 × RJ45 Gigabit Ethernet Input Terminals
Input:
1 × USB Type 2.0; 2 × 3GSDI bidirectional (input and output); 2 × USB Type 3.0; eSATA; HDMI
RGB2(digital):
HDMI w/ HDCP
Output Terminals
Digital:
2 × RJ45 (16-channel AES3-EBU Digital Audio)
 

Power Consumption (typical)

Power Savings Mode 3122W Input Current 18.1A
Power Requirements 100 – 240V AC, 50/60Hz Single Phase for Projector head 220 - 240V AC, 50/60Hz Single Phase for Light source Power Supply Voltage 200 - 240V AC, 50/60Hz Single Phase

Physical Specifications

Dimensions (WxHxD)
Product:
27.4 x 52.6 x 20.1 in. (697 x 1337 x 510mm)
External:
27.4 x 52.6 x 20.0 in. (697 x 1337 x 510mm)
Shipping:
36.5 x 62.6 x 35.0 in. (926 x 1590 x 888 mm)
Weight
Net Weight:
330.8 lbs. / 150 kg
Excluding lens
Shipping:
600 lbs. (272 kg)

Environmental Conditions

Operating Temperature 50-96°F / 10-35°C Operating Humidity 10 to 85% Humidity (Non-Condensing)
Operating Altitude 0 to 3000 m (9,800 ft) Storage Temperature 14-122°F / -10 50°C
Storage Humidity 10% - 85% (non-condensing) Storage Altitude 0-12,000m / 0-39,370ft (above sea level)
Environment Operational temperatures: 50-95°F / 10-35°C
Humidity: 20% - 85% (non-condensing)
Storage temperatures: 14-122°F / -10 50°C
Humidity: 10% - 85% (non-condensing)
 

Limited Warranty (parts & labor)

Registered owners receive a 2-year parts and labor warranty  

Additional Features

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens  

Optical

Light Output(Lumens) 18,000 Lumens Light Source Life 50,000 hours
Throw Ratio 1.13 to 1.66:1 zoom / 1.30 to 1.85:1 / 1.45 to 2.17:1 zoom / 1.63 to 2.71:1 zoom / 1.95 to 3.26:1 zoom / 2.71 to 3.89:1 zoom Projection Distance 2.9 - 35.9 ft. / 0.9 - 10.9 m
Projector Angle +/- 15° (Up / Down) Lens
Zoom:
Motorized
Focus:
Motorized
F number, fnumber:
(NC-60LS12Z) F=2.5, f=26.7-40.5mm, (NC-60LS14Z) F=2.5, f=31.2-45.6mm, (NC-60LS16Z) F=2.5, f=35.4-56.3mm, (NC-60LS19Z) F=2.5, f=41.6-71.1mm, (NC-60LS24Z) F=2.5, f=52.4-85.3mm, (NC-60LS39Z) F=2.5, f=84.9-142.0mm

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 50dB
Regulations US: UL60950-1 (2nd)/ FCC Part15 Class A (Marking: UL) / 'CAN/CSA C22.2, ICES-003 Issue6 ClassA / Latin America: EN60950-1/EN55022 Class A,EN55024, EN61000-3-2/- 3-3/-3-11/-3-12 (Marking CE) / Laser Safety US: FDA(21 CFR 1040.10 and 1040.11): RG3according to Laser Notice 50 / Laser Safety Others: IEC60825-1 2014 : Class1, IEC62471-5 2015 : RG3 Optional Lenses Zoom lens 1.20-1.80 (NC-60LS12Z), Zoom lens 1.40-2.05 (NC-60LS14Z), Zoom lens 1.59-2.53 (NC-60LS16Z), Zoom lens 1.90-3.25 (NC-60LS19Z), Zoom lens 2.40-3.90 (NC-60LS24Z), Zoom lens 3.90-6.50 (NC-60LS39Z)

Accessories

Optional
  • Integrated Media Server(NC-90MS02-4K)
  • Zoom lens 1.20-1.80 (NC-60LS12Z)
  • Lens 1.40-2.05 (NC-60LS14Z)
  • Lens 1.59-2.53 (NC-60LS16Z)
  • Lens 1.90-3.25 (NC-60LS19Z)
  • Lens 2.40-3.90 (NC-60LS24Z)
  • Lens 3.90-6.50 (NC-60LS39Z)
 

Projection Method

3-chip DMD reflection method (DLP Light Engine)  

Primary Lenses

Zoom lens 1.20-1.80 (NC-60LS12Z), Zoom lens 1.40-2.05 (NC-60LS14Z), Zoom lens 1.59-2.53 (NC-60LS16Z), Zoom lens 1.90-3.25 (NC-60LS19Z), Zoom lens 2.40-3.90 (NC-60LS24Z), Zoom lens 3.90-6.50 (NC-60LS39Z)  

Lens Adjustment Functions

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens  

Lamp Bulbs

B Laser Light Source RB Laser Light Source  

Supported Screen Size (maximum)

Up to 62.3 ft. / 21m  

Cooling Method

Liquid cooling inside, air cooling with dust-preventing electrostatic filter  

DMD Specifications

0.98” DMD chip, DC mini 2K  

Notes

*** Subject to installation conditions. Maximum screen size is under the conditions of 14-ft-L @ screen gain 1.8
***** When the AC power to the projector power supply and the lamp power supply are provided by a single cable
 

6 Bayonet-Style Lenses
Allows for quick and easy lens exchange. Optional lenses enable the user to determine the appropriate lens to cover projection distances between 2.6 and 179.8 feet.
Custom DMD shielding
Protects the projector from dust/oil contaminates and provides optimal picture quality.

Press

NEC DISPLAY SOLUTIONS ANNOUNCES FIRST-EVER COMPLETE SERIES OF DIGITAL CINEMA PROJECTORS WITH REPLACABLE LASER MODULES
New 18,000-lumen option completes series of DCI-compliant digital cinema projectors, featuring an easy-to-replace laser module with a full range of brightness options that minimize hassle and lower costs

Warranty Length: Registered owners receive a 2-year parts and labor warranty.

Digital Cinema Projector Misc

Integrated Media Server

Optional Lenses

Lens 1.4-2.05
Lens 1.59-2.53
Lens 1.9-3.25
Lens 2.4-3.9
Lens 3.9-6.5
1.20 - 1.80:1 Zoom Lens (lens shift)

  • User's manual, Important information, Service door key for Projector, Laser administrator key

Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

Projectors

  • If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life.
  • Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control.
  • While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.
  • Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally.
You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:
NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCA type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
  • In the projectors on screen menu select the Setup option.
  • Under setup go to Installation or Installation 1 in the sub menu.
  • Within installation you will need to select Orientation.
  • In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen.
This tip works for most NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
Function F* (this varies from computer to computer)
This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.

To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:

1. Go to the "Extended Menu" and choose "Projector Options."
2. Choose "Setup" and go to page 4.
3. Choose the checkbox "3D Reform Memory" and press OK.

Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.

The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.

To present your digital images or stills using an NEC projector you can use the following memory cards:

Compact flash cards (with a Type II PCMCIA CF adapter)
Smart media (with a 4-in-1 Type II adapter)
Memory stick (with a 4-in-1 Type II adapter)
Memory stick pro (with a 4-in-1 Type II adapter)
Multimedia card (with a 4-in-1 Type II adapter)
Secure digital (with a 4-in-1 Type II adapter)

The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PAL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PAL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
Check your projector's installation guide, or use our Image Calculator.

Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a screen vendor for screen recommendations.
Most lamps have an expected life of about 2000 hours.

There are several things you can do to increase your lamp life.

• Always make sure there is adequate clearance near the intake and exhaust vents.
• Keep the environment clean and relatively dust free.
• Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room.
• Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles.
• Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels.

Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also contact NEC Technical Support to have your lamp recycled by NEC Display Solutions.

For Windows XP (ver. 2.08):

LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Windows Vista (ver. 2.08):

LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800

For Mac OS (Intel) (ver. 1.2.5)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

For Mac OS (PowerPC) (ver. 1.2.4)

LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)

*The "Easy Connection" function cannot be used with VT800.

Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
Excessive moisture, dust, heat and smoke.
You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact NEC technical support or your local NEC service provider to set it up.
No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products
Contact Sales Contact Support