Name: (46") Ultra-Narrow 2x2 TileMatrix Video Wall Solution - Digital
Brand: NEC
SKU: X463UN-TMX4P

Discontinued

Model: X463UN-TMX4P

NEC's complete 46" 2x2 LCD TileMatrix™ Digital Video Wall Solution delivers an all-in-one, easy-to-configure and cost-effective solution that is ideal for dynamic digital signage, information display and command & control applications. Exclusive TileMatrix and TileComp™ technologies, combined with the ultra-narrow bezel design of the NEC X463UN and the full adjustment capabilities of the Peerless DS-VW765-LAND mount, provide for a near seamless video wall without the need for additional third-party equipment.

Bundled solution with everything required for a 2x2 video wall makes configuration and installation easy
Pull-out mount allows for full-service capabilities and 6-axis adjustment for perfect alignment
Direct LED backlighting technology improves power consumption and uniformity
Overframe Bezel Kit, DVI cabling and null modem cabling complete the solution
Overnight onsite exchange warranty ensures minimum downtime for maximum impact
Ultra-narrow bezel (5.7mm) design provides for a near-seamless image
Industry’s most extensive display control, including RS-232, Ethernet connectivity, NaViSet™ software and DDC/CI standard
Standard onsite warranty service for all included displays

Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov

Product Specifications

Display

Panel Technology	SPVA (P-DID)	Viewable Image Size	46 "
Aspect Ratio	16:9	Native Resolution	1920x1080
Pixel Pitch	0.53 mm	Pixels Per Inch	47 @ native resolution
Backlight Type	LED Direct-lit	Brightness (typical)	500 cd/m²
Brightness (maximum)	700 cd/m²	Contrast Ratio (typical)	3500:1
Viewing Angle (typical)	178° Vert., 178° Hor. (89U/89D/89L/89R) @ CR>10	Response Time (Gray to Gray)	8 ms
Refresh Rate	60Hz	Active Screen Area	40.1 x 22.5 in. / 1018.1 x 572.7mm
Orientation	Landscape/Portrait	Displayable Colors	More than 16.7 million

Synchronization Range

Horizontal (Analog/Digital)	31.5-91.1 kHz

Input Signal

Video	Analog RGB 0.7 Vp-p/75 Ohms	Sync	Separate sync: TTL Level (Positive/Negative) Composite sync: TTL Level (Positive/Negative) Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)

Signal Compatibility/Connectivity

PC Signal Compatibility	Yes	Macintosh Signal Compatibility	Yes
Video	Analog RGB 0.7 Vp-p/75 Ohms	Sync	Separate sync: TTL Level (Positive/Negative) Composite sync: TTL Level (Positive/Negative) Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
Input Terminals Analog: VGA 15-pin D-sub, 5 BNC (RGBHV, DVD/HD or Video), BNC Composite, S-Video Digital: DisplayPort, HDMI, DVI-D Audio: RCA Audio, Stereo Mini-Jack (2), HDMI Audio External Control: RS-232C, LAN, IR Remote, DDC/CI		Output Terminals Digital: DisplayPort, DVI-D Audio: Stereo Mini-Jack, External Speaker Jack (2) External Control: RS-232C, IR Remote

Power Consumption (typical)

On	120W	ECO Mode Standby	<0.5W (per display)

Physical Specifications

Dimensions (WxHxD) With stand: 40.3 x 29 x 13 in. / 1024 x 737.8 x 330mm (per display) Without stand: 40.3 x 22.8 x 4.6 in. / 578.6 x 1024 x 118.1 mm Shipping: 50.3 x 33 x 11.9 in. / 1278 x 837 x 301mm (per display)		Weight Net Weight (with stand): 84.7lbs. / 38.4kg (per display) Net Weight (without stand): 53.6 lbs. / 24.3 kg. Shipping: 84.7 lbs. / 38.4 kg (per display)
VESA Hole Configuration	300 x 300mm (4-hole)

Environmental Conditions

Operating Temperature	41-104°F / 5-40°C	Operating Humidity	20-80%
Operating Altitude	13,780 ft. / 4200m	Storage Temperature	-4-140°F / -20-60°C
Storage Humidity	10-90%	Storage Altitude	40,000 ft. / 12,192m

Limited Warranty (parts & labor)

3 Years Onsite Service for displays

Additional Features

LED direct backlighting Ultra-narrow bezel Advanced thermal capabilities Advanced cooling system Sealed panel design Thin bezel TileMatrix (10x10) TileComp Separate group/Monitor ID function Ethernet Control and Communication RS-232 Control and Communication Landscape/portrait capable Carbon footprint meter Plug and Play (DDC/CI, DDC2B) Scheduler (w/ real-time clock) Sharpness/softness adjustment Screen saver function Ambient light sensor (AmbiBright) 6-axis color adjustment Metal rear cabinet POP Side-by-Side Kensington lock Handles Variable picture modes Movie Settings Input labeling Backlight adjust Aspect ratio control Built-in speakers OPS/Expansion slot Custom detect options

Accessories

Optional	Display Wall Calibrator Kit (KT-LFD-CC)

Technologies

Open Pluggable Specification (OPS)

The first industry-wide standardization in option slots that allows for easier installation, use and maintenance of digital signage

Thermal Protection Panel

Starts with an extra thermal layer on the display panel to diffuse heat, followed by a fan-based technology specifically designed to work in both landscape and portrait modes and be controlled locally or remotely. Internal temperature sensors control self-protective circuits, while special self-diagnostics communicate the status of thermal characteristics.

TileMatrix™

Allows users to customize a video wall configuration using advanced On Screen Display controls.

Built-In Expansion Slot

Allows for seamless integration of current and future NEC accessories and third-party components.

Carbon Footprint Meter

Informs and motivates responsible use of the display by calculating and tracking the conservation of green gas emissions in real time.

Round-The-Clock Scheduler

Allows for advanced scheduling of monitor powering up/down, increasing panel lifetime, reducing power consumption and saving the time and expense of finding and purchasing a third-party scheduling solution.

LED Edge-lit Display

Reduces overall depth while also lowering overall power consumption of the product’

TileComp™

Automatically eliminates geometrical distortions between displays by adjusting for the width of the monitor bezels, working in tandem with TileMatrix on NEC displays (some data on the screen will be lost in the area of the bezels).