Discontinued
Model: np1250
 
The power of the NEC NP1250 takes your customers’ images and presentations to new heights. The industry’s first built-in stacking correction capabilities (up to four projectors) allows the projectors to boost an image’s brightness up to 14,800 lumens, which is ideal for larger-sized screens and environments with heavy ambient light. This feature also prevents the complete loss of an image, which can happen when using only one projector.
  • ECO Mode™ technology helps extend lamp life and lowers power consumption
  • 3700-lumen brightness enhances images for most applications
  • HQV™ technology delivers superior home theater video processing
  • Windows Network Projector function simplifies your ability to present from any computer, whether local or remote
  • Geometric Correction Tool allows you to easily project square images on non-flat screen surfaces without distortion
  • AutoSense™ automatically syncs with any computer signal and features one-touch image optimization
  • Complete line of (5) bayonet-style lenses allows for quick and easy lens exchange
  • Stacking correction capabilities (up to four projectors) allows the projectors to boost an image's brightness up to 20,000 lumens

Display

Native Resolution XGA 1024 x 768 Maximum Resolution UXGA 1600 x 1200
Contrast Ratio (typical) 600:1  

Synchronization Range

Horizontal (Analog/Digital) 15-108 kHz Vertical 48-120 Hz

Signal Compatibility/Connectivity

Supported Video Standards NTSC 4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM SD/HD Video Signal Compatibility 480p, 576i, 576p, 720p, 1080i
PC Signal Compatibility SVGA, XGA, WXGA, WXGA+, SXGA, SXGA+, UXGA Macintosh Signal Compatibility Yes
Sync Compatibility Separate Sync / Composite Sync / Sync on G External Control RS-232, IR, Wired LAN
Output Terminals
RGB1(analog):
VGA 15-pin D-sub, Component video using ADP-CV 1E
RGB2(analog):
5 BNC
RGB3(digital):
DVI-D w/ HDCP
Video 1:
RCA
Video 2:
S-Video
Video 3:
Component
Audio 1:
Mini stereo
Audioout:
Yes
Monitor Out:
VGA 15-pin D-sub
 

Power Consumption (typical)

On 460W / NA / NA / NA Input Current 5.5A
Power Requirements 100-240V AC, 50/60 Hz  

Physical Specifications

Dimensions (WxHxD)
Net (with stand):
15.7 x 14.1 x 5.9 in. / 399 x 358 x 150mm
Weight
Net Weight (with stand):
16.1 lbs / 7.3 kg

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Storage -14-122°F / -10-50°C

Limited Warranty (parts & labor)

90 Days.  Lamp warranty is 90 days or 500 hours, whichever comes first.  

Additional Features

  • ECO Mode technology
  • High-speed wireless
  • Computer-free presentations
  • Variable audio out
  • Optional lenses
  • Sleep timer
  • HQV™
  • Geometric correction
  • Stacking correction tool
  • Direct power-off
  • Built-in wall color correction
  • Advanced AccuBlend
  • AutoSense
  • 3D Reform
  • Kensington lock slot
  • Image magnification
  • Discreet source keys
 

Optical

Display Technology 0.8" LCD w/ MLA Light Output(Lumens) 3700normal / Eco = approx. 88% of normal mode
Lamp Type 330W AC Lamp Life (up to) 2000 hours normal / 3000 hours eco
Screen Size (diagonal) 25 to 500 in. / 0.64 to 12.7m Throw Ratio 1.5 to 2 (standard lens)
Projection Distance 2.5 to 68.5 ft. / 0.74 to 20.9m Projector Angle 10.3 to 10.8° tele / 13.7 to 14.5° wide
Lens
Zoom:
1 to 1.33
Focus:
Manual
F number, fnumber:
F=1.7 to 2.2, f=24.4 to 32.5mm
Keystone Correction +/- 40° horizontal, +/- 30° vertical

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 33 dB normal / 30 dB eco
Regulations USA UL 1950 FCC Class B, FCC Part 15 Class B, Canada CSA 950 (C-UL) Optional Lenses NP01FL, NP02ZL, NP03ZL, NP04ZL, NP05ZL
Filterable 16.1  

Light Output

3700normal / Eco = approx. 88% of normal mode  

Contrast Ratio

600:1  

Fan Noise

33 dB normal / 30 dB eco  

Regulations

USA UL 1950 FCC Class B, FCC Part 15 Class B, Canada CSA 950 (C-UL)  

Stacking Capabilities
Allows the projectors to boost an image’s brightness up to 20,000 lumens, which is ideal for larger-sized screens and environments with heavy ambient light. This feature also prevents the complete loss of an image, which can happen when using only one projector.
High-Speed Wireless
IEEE802.11b/g and improved circuitry provide wireless communication up to three times faster than available from previous models.
Geometric Correction
Allows you to project on spheres, cylinders, corner angles and more.
5 Bayonet-Style Lenses
Allows for quick and easy lens exchange. Optional lenses enable the user to determine the appropriate lens to cover projection distances between 2.6 and 283 feet.
HQV™ Video Processing
A high-performance video processing/scaling system designed for computer signals as well as standard or high-definition video, this technology brings home-theater-quality images to meeting rooms and classrooms using pixel-based, motion-adaptive de-interlacing to remove undesirable motion.
Windows Networking
Displays multimedia files (.jpeg, .bmp, .png, .mpeg2 or .wmv9) in the Windows shared folder on a local network using the Viewer function—all without bringing your PC into the conference room.
Windows Remote Desktop
Allows you to control a networked computer by connecting a USB mouse and keyboard directly to the projector’s USB input.
ECO Mode™
Extends lamp life, lowers audible noise and reduces total cost of ownership.
3D Reform
Allows you to square the image by adjusting horizontally, vertically or diagonally when the projector cannot be placed parallel or perpendicular to the screen.
Kensington Lock
Enables a security cable to be attached to the projector.

Press

NEC DISPLAY SOLUTIONS ANNOUNCES STUNNING STACKABLE INSTALLATION PROJECTORS
Four New NP Series Projectors Overlap, Produce up to 20,000 Lumens of Brightness

Warranty Length: 90 Days.  Lamp warranty is 90 days or 500 hours, whichever comes first.

Limited Warranty


 
Advanced Exchange - Overnight Freight Service
Advanced Exchange - Overnight Freight Service
 
 
Repair & Return - Overnight Freight Service
Repair & Return - Overnight Freight Service
 
 
Advanced Exchange - Overnight Freight Service
Advanced Exchange - Overnight Freight Service
 
 
Repair & Return - Overnight Freight Service
Repair & Return - Overnight Freight Service
$189.00 USD

Lamps

 
Replacement Lamp
Replacement Lamp
$493.00 USD

Optional Lenses

Discontinued
0.8:1 Fixed Short-Throw Lens
0.8:1 Fixed Short-Throw Lens
 
Discontinued
1.18–1.54:1 Zoom Lens
1.18–1.54:1 Zoom Lens
 
Discontinued
1.94–3.07:1 Zoom Lens
1.94–3.07:1 Zoom Lens
 
Discontinued
2.98–4.77:1 Zoom Lens
2.98–4.77:1 Zoom Lens
 
Discontinued
4.62–7.02:1 Zoom Lens
4.62–7.02:1 Zoom Lens
 
Refurbished
Discontinued
0.8:1 Fixed Short-Throw Lens
0.8:1 Fixed Short-Throw Lens
 
Refurbished
Discontinued
1.18–1.54:1 Zoom Lens
1.18–1.54:1 Zoom Lens
 
Refurbished
Discontinued
1.94–3.07:1 Zoom Lens
1.94–3.07:1 Zoom Lens
 
Refurbished
Discontinued
2.98–4.77:1 Zoom Lens
2.98–4.77:1 Zoom Lens
 
Refurbished
Discontinued
4.62–7.02:1 Zoom Lens
4.62–7.02:1 Zoom Lens
 

Mounts/Mounts Accessories

Discontinued
Adjustable Extension Column, 12"–18"
Adjustable Extension Column, 12"–18"
 
Discontinued
Adjustable Extension Column, 3'–5'
Adjustable Extension Column, 3'–5'
 
 
Ceiling Mount
Ceiling Mount
$99.00 USD
Learn More
Discontinued
Ceiling Mount
Ceiling Mount
$175.00 USD
Discontinued
Ceiling Plate
Ceiling Plate
 
Discontinued
Ceiling Mount with Input Terminal Cover
Ceiling Mount with Input Terminal Cover
 
Refurbished
Discontinued
Adjustable Extension Column, 12"–18"
Adjustable Extension Column, 12"–18"
 
Refurbished
Discontinued
Adjustable Extension Column, 3'–5'
Adjustable Extension Column, 3'–5'
 
Refurbished
Discontinued
Ceiling Mount
Ceiling Mount
 
Refurbished
Discontinued
Ceiling Mount
Ceiling Mount
 
Refurbished
Discontinued
Ceiling Plate
Ceiling Plate
 
Refurbished
Discontinued
Ceiling Mount with Input Terminal Cover
Ceiling Mount with Input Terminal Cover
 
 
Adjustable Extension Column, 2' - 3'
Adjustable Extension Column, 2' - 3'
$129.00 USD
Learn More
 
Adjustable Extension Column, 3' - 5'
Adjustable Extension Column, 3' - 5'
$159.00 USD
Refurbished
Discontinued
Adjustable Extension Column, 2' - 3'
Adjustable Extension Column, 2' - 3'
 
Refurbished
Discontinued
Adjustable Extension Column, 3' - 5'
Adjustable Extension Column, 3' - 5'
 
 
Ceiling Mount
Ceiling Mount
 
 
Adjustable Extension Column, 6" - 9"
Adjustable Extension Column, 6" - 9"
$99.00 USD
Learn More

Cases

Discontinued
Molded Rolling Shipping Case
Molded Rolling Shipping Case
 
Discontinued
Ballistic Nylon Rolling Case
Ballistic Nylon Rolling Case
 
Refurbished
Discontinued
Molded Rolling Shipping Case
Molded Rolling Shipping Case
 
Refurbished
Discontinued
Ballistic Nylon Rolling Case
Ballistic Nylon Rolling Case
 

Cables/Adapters

Discontinued
Component Video Adapter
Component Video Adapter
 
 
IR Receiver
IR Receiver
$45.00 USD
Learn More
 
Power Cable
Power Cable
$28.00 USD
 
RGB Signal Cable
RGB Signal Cable
$59.00 USD
Refurbished
Discontinued
Component Video Adapter
Component Video Adapter
 
Refurbished
Discontinued
IR Receiver
IR Receiver
 
Refurbished
Discontinued
Power Cable
Power Cable
 
Refurbished
Discontinued
RGB Signal Cable
RGB Signal Cable
 

Replacement Remotes

Discontinued
Remote Control
Remote Control
$75.00 USD
Refurbished
Discontinued
Remote Control
Remote Control
 

Multimedia Projector Speakers

Discontinued
Self-Powered Speaker
Self-Powered Speaker
$145.00 USD
Refurbished
Discontinued
Self-Powered Speaker
Self-Powered Speaker
 

Multimedia Projector Misc

Discontinued
Input Terminal Cover
Input Terminal Cover
 
Refurbished
Discontinued
Input Terminal Cover
Input Terminal Cover
 
Discontinued
Carts
Carts
 
Discontinued
Carts
Carts
 
Refurbished
Discontinued
Carts
Carts
 
Refurbished
Discontinued
Carts
Carts
 
Discontinued
Screens
Screens
 
Discontinued
Screens
Screens
 
Refurbished
Discontinued
Screens
Screens
 
Refurbished
Discontinued
Screens
Screens
 

  • Remote control
  • Batteries
  • Power cord
  • RGB signal cable
  • Lens cap
  • User manual
  • Quick Start Guide
  • Product registration card
  • Wired and wireless networking setup guide
  • Attachable carrying handle
  • Lens anti-theft screw

Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

Multimedia Projectors

The “Out Of Range” error message indicates that you have exceeded the maximum possible video resolution or horizontal & vertical frequency that your display device is capable of using. Lower your input resolution and horizontal/vertical frequency to one that is listed as compatible in the display device specifications chart.
<ul> <li>In the projectors on screen menu select the Setup option.</li> <li>Under setup go to Installation or Installation 1 in the sub menu. </li> <li>Within installation you will need to select Orientation.</li> <li>In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen. </li> </ul>
<ul> <li>If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life. </li> <li>Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control. </li> <li>While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.</li> <li>Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally. </li> </ul>
You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:<br> <ul><li><a href="http://www.necdisplay.com">NEC Website</a></li> <li>Contacting Projector Telephone Support at 800.836.0655.</li> <li>Use our <a href="http://www.necdisplay.com/reseller-locator">Reseller Locator</a> to find a local reseller in your area. </li></ul>
This tip works for <u>most</u> NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCA type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
Function F* (this varies from computer to computer)
This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.
<p>To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:</p> <p style="padding-left:20px;">1. Go to the "Extended Menu" and choose "Projector Options."<br /> 2. Choose "Setup" and go to page 4.<br /> 3. Choose the checkbox "3D Reform Memory" and press OK.</p> <p>Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.</p>
The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.
<p>To present your digital images or stills using an NEC projector you can use the following memory cards:</p> <p style="padding-left:20px;">Compact flash cards (with a Type II PCMCIA CF adapter)<br /> Smart media (with a 4-in-1 Type II adapter)<br /> Memory stick (with a 4-in-1 Type II adapter)<br /> Memory stick pro (with a 4-in-1 Type II adapter)<br /> Multimedia card (with a 4-in-1 Type II adapter)<br /> Secure digital (with a 4-in-1 Type II adapter)</p>
The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PAL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PAL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
Check your projector's installation guide, or use our <a href="/tool/image-calculator/2">Image Calculator</a>.<br /><br /> Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a <a href="#">screen vendor</a> for screen recommendations.
Most lamps have an expected life of about 2000 hours.
<p>There are several things you can do to increase your lamp life.</p> <p style="padding-left:20px;">• Always make sure there is adequate clearance near the intake and exhaust vents.<br /> • Keep the environment clean and relatively dust free.<br /> • Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room.<br /> • Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles.<br /> • Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels. </p>
Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also <a href="../../contact-support">contact NEC Technical Support</a> to have your lamp recycled by NEC Display Solutions.
<p>For Windows XP (ver. 2.08):</p> <p style="padding-left:20px;">LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800</p> <p>For Windows Vista (ver. 2.08):</p> <p style="padding-left:20px;">LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800</p> <p>For Mac OS (Intel) (ver. 1.2.5)</p> <p style="padding-left:20px;">LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)</p> <p>For Mac OS (PowerPC) (ver. 1.2.4)</p> <p style="padding-left:20px;">LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)</p> <p> *The "Easy Connection" function cannot be used with VT800.</p>
Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
<p class="medium_body"> <a href="#">PC Control Utility</a><br /> <a href="#">PC Control Utility Pro</a><br /> <a href="#">Virtual Remote Tool (limited compatibility)</a><br /> <a href="#">Image Express Utility (limited compatibility)</a><p>
Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
Excessive moisture, dust, heat and smoke.
You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact <a href="../../contact-support">NEC technical support</a> or your <a href="#">local NEC service provider</a> to set it up.
No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products

MT1065
NP1000
NP1150
Contact Sales Contact Support