Discontinued
Model: np-um330w
$1,256.00 USD
NEC’s widescreen UM330W is a 3300-lumen ultra short throw projector that packs a multitude of features while delivering an extremely short throw distance for education and corporate applications. A complete interactive projector solution can be created using the optional NP02Wi eBeam interactive system. With its ability to be mounted to the wall directly above the screen on which it projects, this model helps eliminate the shadows and glare typically found with standard projection systems. The UM330W includes a powerful 16W speaker, closed captioning and RJ-45 for remote management over a network, and its input panel includes dual HDMI, VGA and a microphone input to amplify the presenter’s voice. The optional NP02Wi interactive eBeam system enables accurate control and annotation at the screen surface.
  • Ultra short throw lens (0.36:1 throw ratio) helps eliminate shadows on the screen along with projected light in the presenter’s eyes created by traditional front projection systems
  • Comprehensive input/output panel, including dual HDMI, VGA and a microphone input
  • ECO Mode™ technology helps extend lamp life and lowers power consumption
  • Virtual Remote allows the presenter to control the projector from the computer desktop without using the physical remote control
  • Remote monitoring and control of projector over a network saves IT employee time and reduces costs related to projector operation
  • Optional eBeam interactive system allows for annotation and collaboration on a whiteboard locally or via web meetings
  • Available as a bundle with one widescreen ultra short throw projector and NP04WK1 wall mount kit (NP-UM330W-WK1)
  • Available as a bundle with one interactive ultra short throw projector, NP02Wi interactive eBeam module and stylus pen, and NP04WK1 wall mount kit (NP-UM330Wi-WK1)
  • NaViSet Administrator 2: Free software solution that greatly eases administration and management of larger display device installations

Display

Native Resolution WXGA 1280 x 800 Maximum Resolution UXGA 1600 x 1200
Contrast Ratio (typical) 3000:1  

Synchronization Range

Horizontal (Analog/Digital) 15-100 kHz Vertical 50-120 H

Signal Compatibility/Connectivity

Supported Video Standards NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL 60, SECAM SD/HD Video Signal Compatibility 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
PC Signal Compatibility VGA, SVGA, XGA, WXGA, WXGA+, SXGA, SXGA+, UXGA Macintosh Signal Compatibility Yes
Sync Compatibility Separate Sync / Composite Sync / Sync on G External Control RS-232, IR, Wired LAN, DDC/CI, USB, Wireless LAN (optional)
Output Terminals
RGB1(analog):
VGA 15-pin D-sub, Component video using ADP-CV 1E
RGB3(digital):
HDMI
Video 1:
RCA
Video 2:
S-Video
Audio 1:
1/8 in. stereo
Audioout:
Yes (variable)
Monitor Out:
VGA 15-pin D-sub
 

Power Consumption (typical)

On 344W / 233W / 8W / 0.2W Input Current 4.0A/2.0A
Power Requirements 100-240V AC, 50/60 Hz  

Physical Specifications

Dimensions (WxHxD)
Net (with stand):
16.9 x 23.3 x 4.4 in. / 429 x 592 x 112mm
Weight
Net Weight (with stand):
12.6 lbs. / 5.7 kg

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Storage -4-122°F / -20-50°C

Limited Warranty (parts & labor)

2 years. First year Instacare Service. Lamp warranty is 1 year or 500 hours, whichever comes first.  

Additional Features

  • Microphone Input
  • Automatic keystone correction
  • Wireless LAN (Optional)
  • USB Viewer
  • 6000 hour Filter Life
  • Auto power on
  • ECO Mode technology
  • Closed captioning
  • Variable audio out
  • Carbon savings meter
  • Virtual Remote
  • Sleep timer
  • Quick power-off
  • Built-in wall color correction
  • Advanced AccuBlend
  • AutoSense
Wireless Image Utility
  •  

    Optical

    Display Technology 0.59" LCD w/ MLA Light Output(Lumens) 3300lumens
    Lamp Type 265W AC Lamp Life (up to) 3000 hours normal / 6000 hours eco
    Screen Size (diagonal) 58 to 110 in. / 1.47 to 2.79m Throw Ratio 0.36 to 1
    Projection Distance 1.47 to 2.8 ft. / 0.45 to 0.85m Projector Angle 49.2°
    Lens
    Zoom:
    1 to 1.4
    Focus:
    Manual
    F number, fnumber:
    F=1.8
    Keystone Correction Automatic or manual +/- 10°

    Mechanical

    Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 35 dB normal / 28 dB eco
    Regulations USA UL 60950-1 FCC Class B, C-UL CSA 60950-1 ICES-003 Class B  

    Light Output

    3300lumens  

    Contrast Ratio

    3000:1  

    Fan Noise

    35 dB normal / 28 dB eco  

    Regulations

    USA UL 60950-1 FCC Class B, C-UL CSA 60950-1 ICES-003 Class B  

    ECO Mode™
    Extends lamp life, lowers audible noise and reduces total cost of ownership.
    Remote Diagnostics
    Enables the user to monitor and make adjustments to the projector from a remote location.
    Virtual Remote
    Used over the VGA cable to control the projector directly from a computer without the need for additional control cables.
    AutoSense™
    Intuitively syncs the projector with most computer signals and features one-touch image optimization.
    AutoKeystone Correction
    Instantly projects a square image even when the projector is set up at a steep offset angle to the screen.
    Built-In Closed Captioning
    Enables decoding and display of text information from a video.
    Wireless LAN (Optional)
    Allows you to transmit images from a PC wirelessly to the projector, eliminating the need for traditional cumbersome cables.
    Variable Audio Out
    Adjusts the volume of an external speaker system using the projector's remote control.
    USB Viewer
    Permits playback (without a PC) of presentations or display images stored as JPG files from a USB flash drive.
    Quick Startup and Quick Power-Off
    Allows users to begin presenting within 3 to 4 seconds and allows immediate power off with no cooling required after shutdown to ensure efficient energy usage.

    Press

    NEC DISPLAY SOLUTIONS INTRODUCES UM SERIES ULTRA SHORT THROW PROJECTORS WITH INTERACTIVE OPTION
    3300-Lumen Models Ideal for Education and Corporate Customers; Offer Integrated Speaker, Dual HDMI, Remote Management

    Warranty Length: 2 years. First year Instacare Service. Lamp warranty is 1 year or 500 hours, whichever comes first.

    Limited Warranty


     
    Advanced Exchange - Overnight Freight Service
    Advanced Exchange - Overnight Freight Service
     
     
    Repair & Return - Overnight Freight Service
    Repair & Return - Overnight Freight Service
     
     
    Advanced Exchange - Overnight Freight Service
    Advanced Exchange - Overnight Freight Service
     
     
    Repair & Return - Overnight Freight Service
    Repair & Return - Overnight Freight Service
     

    Large Screen Display Misc

     
    MultiPresenter Stick
    MultiPresenter Stick
    • Simple device PIN# access for secure connectivity
    • Screen mirroring for Android and Windows devices
    • Includes a simple annotation software allowing for user collaboration
    • Run apps and share files easily
    $329.00 USD
    Learn More

    Mounts/Mounts Accessories

     
    Ceiling Mount
    Ceiling Mount
    $99.00 USD
    Learn More
     
    Ultra Short Throw Wall Mount
    Ultra Short Throw Wall Mount
    $119.00 USD
    Learn More
     
    Ceiling Plate
    Ceiling Plate
    $143.00 USD
    Learn More
    Discontinued
    Adjustable Extension Column, 12"–18"
    Adjustable Extension Column, 12"–18"
     
    Discontinued
    Adjustable Extension Column, 3'–5'
    Adjustable Extension Column, 3'–5'
     
     
    Adjustable Extension Column, 6" - 9"
    Adjustable Extension Column, 6" - 9"
    $99.00 USD
    Learn More

    Multimedia Projector Misc

    Discontinued
    Interactive eBeam Module and Pen
    Interactive eBeam Module and Pen
    $489.00 USD
    Learn More
     
    Wireless LAN Module
    Wireless LAN Module
    $77.00 USD
    Learn More
    Discontinued
    eBeam Interactive Stylus Pen
    eBeam Interactive Stylus Pen
     

    Lamps

     
    Ultra Short Throw Replacement Lamp
    Ultra Short Throw Replacement Lamp
    $79.00 USD
    Learn More

    Cables/Adapters

     
    IR Receiver
    IR Receiver
    $45.00 USD
    Learn More
    Discontinued
    Power Cord
    Power Cord
    $23.00 USD
    Discontinued
    Component Video Adapter
    Component Video Adapter
     

    Multimedia Projector Speakers

    Discontinued
    Self-Powered Speaker
    Self-Powered Speaker
    $145.00 USD

    Tools

    Discontinued
    NEC’s Interactive Software w/Stylus – Single License
    NEC’s Interactive Software w/Stylus – Single License
    • Elevates control of your presentations and encourages interactivity between presenter and attendees
    • Includes interactive software for PC or Mac, stylus, USB flash drive with video tutorial and NEC Image Express software, license key and setup guide
    • Control your Mac or PC wirelessly (remote keyboard and mouse) from anywhere in the room using your iPad
    • Quickly launch your documents and annotate over them in real time, including PowerPoint and Keynote slideshows
    • Create handwritten and drawn lessons on any background and save them for future playback
    • Control NEC projectors with the built-in Virtual Remote tool using the iPad touchscreen
    • Click here for multiple-license purchase options


    $49.00 USD
    Discontinued
    NEC’s Interactive Software (download)
    NEC’s Interactive Software (download)
    • Elevates control of your presentations and encourages interactivity between presenter and attendees
    • Interactive desktop builds on NEC’s original iPad-based interactive whiteboard software with the addition of audio/video screencasting. This feature allows teachers to easily capture their lesson presentations and share them with students before or after class. Class time can then be spent focusing on interacting and engaging with students rather than simply lecturing.
    • Control your Mac or PC wirelessly (remote keyboard and mouse) from anywhere in the room using your iPad
    • Quickly launch your documents and annotate over them in real time, including PowerPoint and Keynote slideshows
    • Create handwritten and drawn lessons on any background and save them for future playback
    • Control NEC projectors with the built-in Virtual Remote tool using the iPad touchscreen

      For orders of multiple licenses, please contact NEC
      at 866-771-0266
    $19.99 USD
    Learn More

    Replacement Remotes

     
    Remote Control
    Remote Control
    $75.00 USD

    • Remote control; Batteries; RGB cable; User's Manual; Product Registration Card

    Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

    Multimedia Projectors

    The “Out Of Range” error message indicates that you have exceeded the maximum possible video resolution or horizontal & vertical frequency that your display device is capable of using. Lower your input resolution and horizontal/vertical frequency to one that is listed as compatible in the display device specifications chart.
    <ul> <li>In the projectors on screen menu select the Setup option.</li> <li>Under setup go to Installation or Installation 1 in the sub menu. </li> <li>Within installation you will need to select Orientation.</li> <li>In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen. </li> </ul>
    <ul> <li>If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life. </li> <li>Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control. </li> <li>While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.</li> <li>Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally. </li> </ul>
    You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:<br> <ul><li><a href="http://www.necdisplay.com">NEC Website</a></li> <li>Contacting Projector Telephone Support at 800.836.0655.</li> <li>Use our <a href="http://www.necdisplay.com/reseller-locator">Reseller Locator</a> to find a local reseller in your area. </li></ul>
    This tip works for <u>most</u> NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
    NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCA type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
    Function F* (this varies from computer to computer)
    This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
    If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
    With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.
    <p>To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:</p> <p style="padding-left:20px;">1. Go to the "Extended Menu" and choose "Projector Options."<br /> 2. Choose "Setup" and go to page 4.<br /> 3. Choose the checkbox "3D Reform Memory" and press OK.</p> <p>Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.</p>
    The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
    The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.
    <p>To present your digital images or stills using an NEC projector you can use the following memory cards:</p> <p style="padding-left:20px;">Compact flash cards (with a Type II PCMCIA CF adapter)<br /> Smart media (with a 4-in-1 Type II adapter)<br /> Memory stick (with a 4-in-1 Type II adapter)<br /> Memory stick pro (with a 4-in-1 Type II adapter)<br /> Multimedia card (with a 4-in-1 Type II adapter)<br /> Secure digital (with a 4-in-1 Type II adapter)</p>
    The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
    Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PAL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PAL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
    Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
    It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
    Check your projector's installation guide, or use our <a href="/tool/image-calculator/2">Image Calculator</a>.<br /><br /> Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
    As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
    Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a <a href="#">screen vendor</a> for screen recommendations.
    Most lamps have an expected life of about 2000 hours.
    <p>There are several things you can do to increase your lamp life.</p> <p style="padding-left:20px;">• Always make sure there is adequate clearance near the intake and exhaust vents.<br /> • Keep the environment clean and relatively dust free.<br /> • Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room.<br /> • Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles.<br /> • Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels. </p>
    Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also <a href="../../contact-support">contact NEC Technical Support</a> to have your lamp recycled by NEC Display Solutions.
    <p>For Windows XP (ver. 2.08):</p> <p style="padding-left:20px;">LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800</p> <p>For Windows Vista (ver. 2.08):</p> <p style="padding-left:20px;">LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800</p> <p>For Mac OS (Intel) (ver. 1.2.5)</p> <p style="padding-left:20px;">LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)</p> <p>For Mac OS (PowerPC) (ver. 1.2.4)</p> <p style="padding-left:20px;">LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)</p> <p> *The "Easy Connection" function cannot be used with VT800.</p>
    Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
    PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
    The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
    <p class="medium_body"> <a href="#">PC Control Utility</a><br /> <a href="#">PC Control Utility Pro</a><br /> <a href="#">Virtual Remote Tool (limited compatibility)</a><br /> <a href="#">Image Express Utility (limited compatibility)</a><p>
    Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
    Excessive moisture, dust, heat and smoke.
    You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact <a href="../../contact-support">NEC technical support</a> or your <a href="#">local NEC service provider</a> to set it up.
    No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products

    NP-U310W
    Contact Sales Contact Support