Discontinued
Model: np-m402x
$959.00 USD
Easy to use and at the right price, M Series projectors using the latest DLP(R) technology from Texas Instruments provide all the essential features that you need to connect with your audience. The 4000-lumen, XGA (1024 x 768) native resolution NEC M402X is ideal for education and small-to-medium-sized business environments that need essential features, including bright images, automatic technologies and eco-friendly appeal. The M402X offers lamp life up to 8,000 hours and a high contrast ratio of up to 10,000:1, while Crestron Roomview aids in emergency messaging. The versatile, color-coded connections to various sources aid in classroom and conference room use, including those in healthcare environments where its DICOM Simulation technology can be utilized. AutoSense(TM) intuitively syncs the projector with most computer signals and features one touch optimization. The environment is kept in mind with ECO Mode™ technology, a carbon savings meter, extended filter life, and energy-saving features such as quick startup and direct power off.
  • Easy wireless communication enhances portability. To learn more, click here
  • Maintenance free design eliminates the hassle and time spent monitoring and/or changing filters. To learn more, click here
  • USB Viewer allows you to present without a PC using a USB flash drive
  • Powerful 20W speaker provides volume needed for large rooms
  • ECO Mode™ technology helps extend lamp life and lowers power consumption with Constant Brightness which prevents the usual drop in brightness over time while maximizing lamp life. To learn more, click here
  • Integrated active lens cover mutes audio and video while lowering the lamp power to 25% to conserve energy
  • Automatic keystone correction technology instantly projects a square image even when the projector is set up at a steep offset angle to the screen
  • Filter free with shielded engine eliminates the hassle and time spent monitoring and/or changing filters
  • NaViSet Administrator 2: Free software solution that greatly eases administration and management of larger display device installations

Display

Native Resolution XGA 1024 x 768 Maximum Resolution WUXGA 1920 x 1200
Contrast Ratio (typical) 10,000:1  

Synchronization Range

Horizontal (Analog/Digital) 15-100 kHz Vertical 50-120 Hz

Signal Compatibility/Connectivity

Supported Video Standards NTSC, NTSC 4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM SD/HD Video Signal Compatibility Y/CB/Cr component (with optional adaptor ADP-CV1E) 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
PC Signal Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA Macintosh Signal Compatibility Yes
Sync Compatibility Separate Sync / Composite Sync / Sync on G External Control RS-232, IR, Wired LAN, DDC/CI, USB, Wireless LAN (optional)
Output Terminals
RGB1(analog):
VGA 15-pin D-sub
RGB3(digital):
HDMI w/ HDCP
RGB4(digital):
HDMI w/ HDCP
RGB5(digital):
USB A type
Video 1:
RCA
Audio 1:
L/R RCA (shared by video sources)
Audio 2:
1/8 in. stereo
Audio 3:
Microphone
Audioout:
Yes
Monitor Out:
VGA 15-pin D-sub
 

Power Consumption (typical)

On 335W / 246W / 2.5W / 0.2W Input Current 3.9A/1.9A
Power Requirements 100-240V AC, 50/60 Hz  

Physical Specifications

Dimensions (WxHxD)
Net (with stand):
14.5 x 11.5 x 4.3 in. / 368 x 292 x 108mm
Weight
Net Weight (with stand):
8.0 lbs. / 3.6 kg

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Storage -14-122°F / -10-50°C

Limited Warranty (parts & labor)

2 years. First year Instacare Service. Lamp warranty is 1 year or 500 hours, whichever comes first.  

Additional Features

  • Automatic keystone correction
  • Wireless LAN (Optional)
  • Active Lens Cover
  • USB Viewer
  • Cornerstone - available using geometric correction software
  • Geometric Correction
  • Auto power on
  • ECO Mode technology
  • Closed captioning
  • Variable audio out
  • Carbon savings meter
  • Virtual Remote
  • Sleep timer
  • Built-in wall color correction
  • Advanced AccuBlend
  • AutoSense
Wireless Image Utility
  •  

    Optical

    Display Technology DLP (0.55" DMD) Light Output(Lumens) 4000normal
    Lamp Type 335W AC / 246W eco Lamp Life (up to) 3500 hours normal / 8000 hours eco
    Screen Size (diagonal) 30 to 300 in. / 0.76 to 7.6m Throw Ratio 1.6 – 2.72:1
    Projection Distance 3.0 to 52.4 ft. / 0.9 to 15.97m Projector Angle 10.5° to 17.6°
    Lens
    Zoom:
    1.7
    Focus:
    Manual
    F number, fnumber:
    F=2.4 to 3.1, f=17.09 to 29.05mm
    Keystone Correction +/- 30% Horizontal & Vertical (Automatic/Manual)

    Mechanical

    Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 38 dB normal / 33 dB eco
    Regulations UL60950-1, CSA60950-1, FCC Part 15 Class B, ICES-03 Class B  

    Light Output

    4000normal  

    Contrast Ratio

    10,000:1  

    Fan Noise

    38 dB normal / 33 dB eco  

    Regulations

    UL60950-1, CSA60950-1, FCC Part 15 Class B, ICES-03 Class B  

    USB Viewer
    Permits playback (without a PC) of presentations or display images stored as JPG files from a USB flash drive.
    Variable Audio Out
    Adjusts the volume of an external speaker system using the projector's remote control.
    DLP Technology
    High contrast images (10,000:1) from the latest Texas Instruments DLP engine featuring BrilliantColor™ technology with improved color accuracy
    20W Audio
    Powerful 20-watt speaker provides volume needed for large rooms

    Press

    NEC DISPLAY SOLUTIONS INTRODUCES M SERIES PORTABLE PROJECTORS FOR EDUCATORS AND BUSINESSES
    Advanced Networking Capabilities, Extended Lamp Life and Environmentally Friendly Features Hallmarks of NEC Digital Projectors

    Warranty Length: 2 years. First year Instacare Service. Lamp warranty is 1 year or 500 hours, whichever comes first.

    Limited Warranty


     
    Advanced Exchange - Overnight Freight Service
    Advanced Exchange - Overnight Freight Service
     
     
    Repair & Return - Overnight Freight Service
    Repair & Return - Overnight Freight Service
     
     
    Advanced Exchange - Overnight Freight Service
    Advanced Exchange - Overnight Freight Service
     
     
    Repair & Return - Overnight Freight Service
    Repair & Return - Overnight Freight Service
     

    Large Screen Display Misc

     
    MultiPresenter Stick
    MultiPresenter Stick
    • Simple device PIN# access for secure connectivity
    • Screen mirroring for Android and Windows devices
    • Includes a simple annotation software allowing for user collaboration
    • Run apps and share files easily
    $329.00 USD
    Learn More

    Mounts/Mounts Accessories

     
    Ceiling Mount
    Ceiling Mount
    $99.00 USD
    Learn More
     
    Ceiling Mount
    Ceiling Mount
    $140.00 USD
    Learn More
    Refurbished
    Discontinued
    Ceiling Mount
    Ceiling Mount
     
    Refurbished
    Discontinued
    Ceiling Mount
    Ceiling Mount
     
    Discontinued
    Adjustable Extension Column, 12"–18"
    Adjustable Extension Column, 12"–18"
     
    Discontinued
    Adjustable Extension Column, 3'–5'
    Adjustable Extension Column, 3'–5'
     
    Discontinued
    Security Cage
    Security Cage
     
    Refurbished
    Discontinued
    Adjustable Extension Column, 12"–18"
    Adjustable Extension Column, 12"–18"
     
    Refurbished
    Discontinued
    Adjustable Extension Column, 3'–5'
    Adjustable Extension Column, 3'–5'
     
    Refurbished
    Discontinued
    Security Cage
    Security Cage
     
     
    Ceiling Plate
    Ceiling Plate
    $143.00 USD
    Learn More
    Refurbished
    Discontinued
    Ceiling Plate
    Ceiling Plate
     
     
    Adjustable Extension Column, 6" - 9"
    Adjustable Extension Column, 6" - 9"
    $99.00 USD
    Learn More
    Discontinued
    Offset Bracket
    Offset Bracket
    $52.00 USD

    Cables/Adapters

    Discontinued
    Component Video Adapter
    Component Video Adapter
     
     
    IR Receiver
    IR Receiver
    $45.00 USD
    Learn More
    Refurbished
    Discontinued
    Component Video Adapter
    Component Video Adapter
     
    Refurbished
    Discontinued
    IR Receiver
    IR Receiver
     
     
    RGB Signal Cable
    RGB Signal Cable
    $59.00 USD
    Refurbished
    Discontinued
    RGB Signal Cable
    RGB Signal Cable
     
    Discontinued
    Power Cord
    Power Cord
    $23.00 USD
     
    Cable Cover
    Cable Cover
    $64.00 USD
    Learn More

    Multimedia Projector Speakers

    Discontinued
    Self-Powered Speaker
    Self-Powered Speaker
    $145.00 USD
    Refurbished
    Discontinued
    Self-Powered Speaker
    Self-Powered Speaker
     

    Multimedia Projector Misc

     
    Wireless LAN Module
    Wireless LAN Module
    $77.00 USD
    Learn More
    Refurbished
    Discontinued
    Wireless LAN Module
    Wireless LAN Module
     
     
    Active Shutter Glasses
    Active Shutter Glasses
    $85.00 USD
    Learn More

    Lamps

     
    Replacement Lamp
    Replacement Lamp
    $96.00 USD
    Learn More

    Replacement Remotes

     
    Remote Control
    Remote Control
    $75.00 USD

    • Remote control
    • Batteries
    • Power cord
    • RGB signal cable
    • Built-in Lens cover
    • User manual
    • Quick Start Guide
    • Product registration card
    • CD-ROM
    • Carrying case

    Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

    Multimedia Projectors

    The “Out Of Range” error message indicates that you have exceeded the maximum possible video resolution or horizontal & vertical frequency that your display device is capable of using. Lower your input resolution and horizontal/vertical frequency to one that is listed as compatible in the display device specifications chart.
    <ul> <li>In the projectors on screen menu select the Setup option.</li> <li>Under setup go to Installation or Installation 1 in the sub menu. </li> <li>Within installation you will need to select Orientation.</li> <li>In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen. </li> </ul>
    <ul> <li>If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life. </li> <li>Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control. </li> <li>While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.</li> <li>Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally. </li> </ul>
    You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:<br> <ul><li><a href="http://www.necdisplay.com">NEC Website</a></li> <li>Contacting Projector Telephone Support at 800.836.0655.</li> <li>Use our <a href="http://www.necdisplay.com/reseller-locator">Reseller Locator</a> to find a local reseller in your area. </li></ul>
    This tip works for <u>most</u> NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
    NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCA type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
    Function F* (this varies from computer to computer)
    This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
    If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
    With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.
    <p>To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:</p> <p style="padding-left:20px;">1. Go to the "Extended Menu" and choose "Projector Options."<br /> 2. Choose "Setup" and go to page 4.<br /> 3. Choose the checkbox "3D Reform Memory" and press OK.</p> <p>Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.</p>
    The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
    The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.
    <p>To present your digital images or stills using an NEC projector you can use the following memory cards:</p> <p style="padding-left:20px;">Compact flash cards (with a Type II PCMCIA CF adapter)<br /> Smart media (with a 4-in-1 Type II adapter)<br /> Memory stick (with a 4-in-1 Type II adapter)<br /> Memory stick pro (with a 4-in-1 Type II adapter)<br /> Multimedia card (with a 4-in-1 Type II adapter)<br /> Secure digital (with a 4-in-1 Type II adapter)</p>
    The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
    Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PAL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PAL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
    Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
    It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
    Check your projector's installation guide, or use our <a href="/tool/image-calculator/2">Image Calculator</a>.<br /><br /> Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
    As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
    Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a <a href="#">screen vendor</a> for screen recommendations.
    Most lamps have an expected life of about 2000 hours.
    <p>There are several things you can do to increase your lamp life.</p> <p style="padding-left:20px;">• Always make sure there is adequate clearance near the intake and exhaust vents.<br /> • Keep the environment clean and relatively dust free.<br /> • Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room.<br /> • Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles.<br /> • Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels. </p>
    Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also <a href="../../contact-support">contact NEC Technical Support</a> to have your lamp recycled by NEC Display Solutions.
    <p>For Windows XP (ver. 2.08):</p> <p style="padding-left:20px;">LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800</p> <p>For Windows Vista (ver. 2.08):</p> <p style="padding-left:20px;">LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800</p> <p>For Mac OS (Intel) (ver. 1.2.5)</p> <p style="padding-left:20px;">LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)</p> <p>For Mac OS (PowerPC) (ver. 1.2.4)</p> <p style="padding-left:20px;">LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)</p> <p> *The "Easy Connection" function cannot be used with VT800.</p>
    Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
    PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
    The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
    <p class="medium_body"> <a href="#">PC Control Utility</a><br /> <a href="#">PC Control Utility Pro</a><br /> <a href="#">Virtual Remote Tool (limited compatibility)</a><br /> <a href="#">Image Express Utility (limited compatibility)</a><p>
    Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
    Excessive moisture, dust, heat and smoke.
    You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact <a href="../../contact-support">NEC technical support</a> or your <a href="#">local NEC service provider</a> to set it up.
    No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products
    Contact Sales Contact Support