Discontinued
Model: np-p502h
$2,099.00 USD
The NEC P502H (5000 lumens) gives your presentations a boost in brightness. A widescreen professional installation projector loaded with eco-friendly and advanced technologies makes it ideal for higher education classrooms, corporate boardrooms and government training rooms. Advanced installation features such as horizontal & vertical lens shift provides even great installation flexibility. Adding horizontal & vertical keystone keeps the image square on the screen if installation challanges exist.

  Join NEC on a journey through the state of technology in education and hear from real schools about their technology issues and solutions. Click here!
  • Dual HDMI inputs (with HDCP) ensures quick switching between presentations
  • 6,000:1 Contrast Ratio creating extremely detailed images
  • Built-in HDBaseT enables simplified installations with a single cable for video, audio, and control signals: LAN connection for control and asset management over the network
  • 5000-hour filter drastically reduces cleaning frequency, thereby decreasing the total cost of ownership
  • Variable audio-out allows the remote control to adjust speaker volume
  • Eco-friendly features, minimal maintenance and cost savings mean these projectors are still great for demanding integration applications such as higher education and corporate
  • Powerful 20W speakers provide volume needed for large rooms
  • Horizontal & Vertical lens shift enables flexible projector placement
  • IEU Lite (Image Express Utility Lite) for audio and video transmission from a computer to the projector over the network
  • NaViSet Administrator 2: Free software solution that greatly eases administration and management of larger display device installations

Display

Native Resolution 1080p 1920 x 1080 Maximum Resolution WUXGA 1920 x 1200
Contrast Ratio (typical) 6000:1 with lamp control  

Synchronization Range

Horizontal (Analog/Digital) 15-100 kHz/15-153 kHz Vertical 50-120 Hz/24-120 Hz

Signal Compatibility/Connectivity

Supported Video Standards NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM SD/HD Video Signal Compatibility 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
PC Signal Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA Macintosh Signal Compatibility Yes
Sync Compatibility Separate Sync / Composite Sync / Sync on G External Control RS-232, IR, DDC/CI, USB, LAN
Output Terminals
RGB1(analog):
VGA 15-pin D-sub
RGB2(digital):
HDMI w/HDCP
RGB3(digital):
HDMI w/HDCP
RGB4(digital):
HDBaseT
Video 1:
RCA
Audio 1:
RCA
Audio 2:
1/8 in. stereo
Audioout:
1/8 in. stereo (Variable audio out)
Monitor Out:
VGA 15-pin D-sub
 

Power Consumption (typical)

On 465W / 311W / 2.7W / 0.26W Input Current 5.4-2.2A
Power Requirements 100-240V AC, 50/60 Hz  

Physical Specifications

Dimensions (WxHxD)
Net (with stand):
14.3 x 11.9 x 5.0 in. / 362 x 302 x 128mm
Weight
Net Weight (with stand):
12.1 lbs. / 5.5 kg

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Storage 14-122°F / -10-50°C

Limited Warranty (parts & labor)

3 years (excluding consumables). First year Instacare Service.  

Additional Features

  • Manual keystone correction
  • Wireless LAN
  • USB Viewer
  • Auto power on
  • ECO Mode technology
  • Closed captioning
  • Variable audio out
  • Carbon savings meter
  • Virtual Remote
  • Sleep timer
  • Built-in wall color correction
  • Advanced AccuBlend
  • AutoSense
 

Optical

Display Technology DLP (0.65" DMD) Light Output(Lumens) 5000normal
Lamp Type 375W AC Lamp Life (up to) 5,000 hours
Screen Size (diagonal) 30 to 300 in. / 0.76 to 7.6m Throw Ratio 1.24 to 2.1
Projection Distance 2.6 to 46.6 ft. / 0.8 to 14.2m Projector Angle 7.5 to 7.7° tele / 12.8 to 13.1° wide
Lens
Zoom:
1 to 1.7
Focus:
Manual
F number, fnumber:
F=2.0, f=18.2 to 31.1mm
Keystone Correction +/- 25° horizontal, +/- 30° vertical

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 39 dB normal / 31 dB eco
Regulations USA UL 60950-1 / FCC Part15 Class B, Canada CSA 60950-1 / ICES-003 Class B, NOM  

Light Output

5000normal  

Contrast Ratio

6000:1 with lamp control  

Fan Noise

39 dB normal / 31 dB eco  

Regulations

USA UL 60950-1 / FCC Part15 Class B, Canada CSA 60950-1 / ICES-003 Class B, NOM  

20W Audio
Powerful 20-watt speaker provides volume needed for large rooms
3D Ready
When combined with active shutter glasses (NP02GL), this projector uses DLP Link™ technology, developed by Texas Instruments, to create 3D images.
Auto Power On
Powers on the projector as soon as it is plugged into a power outlet.
BrilliantColor™
Advanced video processing from Texas Instruments delivers exceptional picture management control for both progressive and interlaced sources, while making images more vibrant, colors more realistic and blacks richer with detail.
Built-In Closed Captioning
Enables decoding and display of text information from a video.
Built-in Wall Color Correction
Presets provide for adaptive color tone correction to display properly on non-white surfaces.
Crestron Roomview
Provides unified management, including the ability to switch the power on and off for multiple projectors connected to a network.
DLP Technology
High contrast images (10,000:1) from the latest Texas Instruments DLP engine featuring BrilliantColor™ technology with improved color accuracy
Dual HDMI inputs (with HDCP)
Ensure quick switching between presentations and allows for simultaneous digital connections of high-definition sources, such as Blu-ray players, cable boxes, satellite receivers and computers
ECO Mode™
Extends lamp life, lowers audible noise and reduces total cost of ownership.
Image Express Utility Lite with audio transfer
provides wired and wireless data transmission via peer-to-peer or over the network
Advanced AccuBlend™
Ensures detailed images when non-native resolution sources are connected to the projector.
Lens Shift
Vertical and horizontal lens shift enables flexible projector placement.
Power Management
Enables projector to automatically turn off when an incoming signal is not detected from any of the inputs.
USB Viewer
Permits playback (without a PC) of presentations or display images stored as JPG files from a USB flash drive.
Variable Audio Out
Adjusts the volume of an external speaker system using the projector's remote control.
Virtual Remote
Used over the VGA cable to control the projector directly from a computer without the need for additional control cables.
Wired Network Connection
Integrated RJ45 connection for quick connection to the LAN (10/100 base-T capability).
Wireless Imaging Utility
Allows users to send an image from an iPad directly to the projector
Wireless LAN (Optional)
Allows you to transmit images from a PC wirelessly to the projector, eliminating the need for traditional cumbersome cables.
1080p native resolution (1920x1080)
High resolution provides detailed display of text, graphics and images. HD video is displayed in 16:9 wide aspect ratio.

Press

INSTALLATION FLEXIBILITY OF HIGH-END PROJECTORS COMES TO BUSINESSES, SCHOOLS, COURTESY OF NEC DISPLAY SOLUTIONS
The New P Series Projectors Tackle Most Demanding Deployments With Key Elements Such As Horizontal And Vertical Lens Shift

Warranty Length: 3 years.  Lamp warranty is 1 year or 500 hours, whichever comes first.

Limited Warranty


 
Advanced Exchange - Overnight Freight Service
Advanced Exchange - Overnight Freight Service
 
 
Repair & Return - Overnight Freight Service
Repair & Return - Overnight Freight Service
 
 
Advanced Exchange - Overnight Freight Service
Advanced Exchange - Overnight Freight Service
 
 
Repair & Return - Overnight Freight Service
Repair & Return - Overnight Freight Service
$189.00 USD

Cables/Adapters

 
Wireless LAN Adapter
Wireless LAN Adapter
$77.00 USD
Learn More
 
RGB Signal Cable
RGB Signal Cable
$59.00 USD
 
IR Receiver
IR Receiver
$45.00 USD
Learn More
Discontinued
Component Video Adapter
Component Video Adapter
 
Discontinued
BNC Adapter Cable
BNC Adapter Cable
 

Multimedia Projector Misc

 
Terminal Cover
Terminal Cover
$64.00 USD
Learn More
 
RF Transmitter
RF Transmitter
$53.00 USD
Learn More
 
3D Glasses
3D Glasses
$65.00 USD
Learn More

Lamps

 
Replacement Lamp
Replacement Lamp
$344.00 USD
Learn More

Multimedia Projector Speakers

Discontinued
Powered Speaker
Powered Speaker
$320.00 USD
Learn More

Large Screen Display Misc

 
MultiPresenter Stick
MultiPresenter Stick
  • Simple device PIN# access for secure connectivity
  • Screen mirroring for Android and Windows devices
  • Includes a simple annotation software allowing for user collaboration
  • Run apps and share files easily
$329.00 USD
Learn More

Option Cards

 
HDBaseT media switch
HDBaseT media switch
$699.00 USD
Learn More

Software

 
DisplayNote Site License
DisplayNote Site License
 

Mounts/Mounts Accessories

 
Ceiling Plate
Ceiling Plate
$143.00 USD
Learn More
 
Ceiling Mount
Ceiling Mount
$99.00 USD
Learn More
 
Ceiling Mount
Ceiling Mount
$140.00 USD
Learn More
 
Adjustable Extension Column, 6" - 9"
Adjustable Extension Column, 6" - 9"
$99.00 USD
Learn More
 
Adjustable Extension Column, 3' - 5'
Adjustable Extension Column, 3' - 5'
$159.00 USD
 
Adjustable Extension Column, 2' - 3'
Adjustable Extension Column, 2' - 3'
$129.00 USD
Learn More
 
Adjustable Extension Column, 12" - 18"
Adjustable Extension Column, 12" - 18"
$119.00 USD
Learn More

  • Remote control
  • Batteries
  • Power cord
  • RGB signal cable
  • User manual
  • Quick Start Guide
  • Important Info
  • Product registration card
  • Security Stricker

Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

Multimedia Projectors

The “Out Of Range” error message indicates that you have exceeded the maximum possible video resolution or horizontal & vertical frequency that your display device is capable of using. Lower your input resolution and horizontal/vertical frequency to one that is listed as compatible in the display device specifications chart.
<ul> <li>In the projectors on screen menu select the Setup option.</li> <li>Under setup go to Installation or Installation 1 in the sub menu. </li> <li>Within installation you will need to select Orientation.</li> <li>In orientation select the box that says desktop front, press enter and change the option to either ceiling front or ceiling rear depending on which direction the unit is facing in regards to the screen. </li> </ul>
<ul> <li>If the lamp indicator light on the projector is solid red then you would need to change the lamp as it has been used beyond its usable life. </li> <li>Once the new lamp is installed you will need to reset the lamp hours of the projector with the remote control. </li> <li>While the unit is in standby mode, meaning the power light is solid orange, you will need to hold down the help button on the remote for 10 to 15 seconds.</li> <li>Once the lamp hours are reset the lamp LED light will go out and at that time the unit should power on normally. </li> </ul>
You will need an additional accessory called a remote mouse receiver -Part Number NP01MR. 3 Ways to Order:<br> <ul><li><a href="http://www.necdisplay.com">NEC Website</a></li> <li>Contacting Projector Telephone Support at 800.836.0655.</li> <li>Use our <a href="http://www.necdisplay.com/reseller-locator">Reseller Locator</a> to find a local reseller in your area. </li></ul>
This tip works for <u>most</u> NEC Projectors: First, ensure that the projector is powered “on.” Second, hold down the “cancel” or “exit” button on the projector for about 15 to 20 seconds.
NEC projector input panels feature RGB computer inputs, a composite video input (yellow RCA type plug) and an S-Video input. The RGB computer input (blue) and can also be used with an optional component video adapter for connection to a DVD player or other video source, if desired.
Function F* (this varies from computer to computer)
This can be done by going into the OSM and making the change there or by sending a specific RS232 command to the projector from a computer.
If you are experiencing an issues related to image quality, colors, and signal, Factory Reset is the first setup to perform. (Please make a note of any custom setting prior to doing a factory reset.)
With certain NEC projectors it is possible to project onto non-flat surfaces such as cylinders or corners using free software such as the Geometric Correction Tool, Keep in mind that the 16:9 format will not be supported.
<p>To permanently save your digital keystone corrections by activating "3D Reform Memory." To do this:</p> <p style="padding-left:20px;">1. Go to the "Extended Menu" and choose "Projector Options."<br /> 2. Choose "Setup" and go to page 4.<br /> 3. Choose the checkbox "3D Reform Memory" and press OK.</p> <p>Your horizontal, vertical and diagonal 3D reform (keystone) data will now be permanently saved.</p>
The flash memory card or USB drive must be formatted with the FAT16 or FAT file system. (FAT32 and NTFS are not recognized.)
The PC card slot, which is situated on the projector main unit, allows you to make presentations without a PC. Just insert a compact flash or flash memory card containing your stored presentation material and display images directly onto a screen. The projector will display JPEG, BMP, TXT and text-only HTML files.
<p>To present your digital images or stills using an NEC projector you can use the following memory cards:</p> <p style="padding-left:20px;">Compact flash cards (with a Type II PCMCIA CF adapter)<br /> Smart media (with a 4-in-1 Type II adapter)<br /> Memory stick (with a 4-in-1 Type II adapter)<br /> Memory stick pro (with a 4-in-1 Type II adapter)<br /> Multimedia card (with a 4-in-1 Type II adapter)<br /> Secure digital (with a 4-in-1 Type II adapter)</p>
The PC Card Viewer and the Blackboard Function. Projectors equipped with the PC Card Viewer feature are particularly suitable for mobile use since you do not need a notebook or PC to make a presentation. Instead, you can take your presentation along with you stored on a normal PC card or Compact Flash card. Meanwhile, the Blackboard feature allows you to create drawings via the USB mouse and project them onto a screen, facilitating interactive presentations and audience rapport.
Yes. NEC projectors are fitted with inputs for video and S-Video, and meet NTSC, PAL, SECAM, 4.43NTSC and PAL60 standards. You can connect the projector using video, S-video and component (YUV) cables. Please, all projectors are PAL Progressive-enabled (via YUV or RGB). The latest NEC projectors produce virtually no irritating fan noise.
Most projectors use LCD technology. This splits light into the primary colors red, green and blue. Each color is then directed through an LCD display acting as a ‘light valve’ and the light is then reassembled. There is an LCD display for each individual pixel and each primary color. DLP technology involves the use of huge numbers of tiny quadratic mirrors arrayed on a Texas Instruments DMD chip. Only when a mirror is tilted will it reflect the light shining onto it back towards the screen. This very high-frequency switching on and off of points of light is not perceived by the human eye and allows different shades of color to be portrayed. The colors are generated by a color ribbon featuring the primary colors red, green and blue.
It depends on the installation environment. In environments with more ambient light, we recommend choosing DLP. For the greatest flexibility, choose an NEC projector that features both technologies.
Check your projector's installation guide, or use our <a href="/tool/image-calculator/2">Image Calculator</a>.<br /><br /> Keep in mind that distances shown in the Installation Guide or Image Calculator may vary ± 5%. We recommend that you verify the distance before the projector is installed.
As a general rule, the distance between the viewers and the screen should between 1.5 and 6 times the image width.
Your ideal screen will depend on your installation, the size of the room, the amount of ambient light, and other factors. We recommend contacting your installer or a <a href="#">screen vendor</a> for screen recommendations.
Most lamps have an expected life of about 2000 hours.
<p>There are several things you can do to increase your lamp life.</p> <p style="padding-left:20px;">• Always make sure there is adequate clearance near the intake and exhaust vents.<br /> • Keep the environment clean and relatively dust free.<br /> • Clean air filters every 100 hours, or more often if there are a lot of dust or contaminants in the room.<br /> • Striking the lamp ages the lamp as it causes slight changes to the shape of the electrodes that light the lamp, so light up your projector when you're ready to use it and avoid frequent on and off cycles.<br /> • Avoid shock to the lamp or projector. • Use Eco-Mode, if your projector has it. • After you run the projector, leave it plugged in until the fan turns itself off. • Avoid storing the lamp or projector in extreme temperatures or humidity levels. </p>
Certain projector lamps contain mercury. Some states have laws that require projector lamps to be disposed of as a hazardous material if they contain mercury. Check with your audio-visual sales associate or local municipality to find out what the projector lamp disposal laws are for your state. You may also <a href="../../contact-support">contact NEC Technical Support</a> to have your lamp recycled by NEC Display Solutions.
<p>For Windows XP (ver. 2.08):</p> <p style="padding-left:20px;">LT265 & LT245 (Firmware Version: 1.04 or later) / WT610 (Firmware Version: 1.08 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800</p> <p>For Windows Vista (ver. 2.08):</p> <p style="padding-left:20px;">LT265 / 245 (Firmware Version: 1.04 or later) / WT615 / 610 (Firmware Version: 1.08 or later) / LT380 / 280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800</p> <p>For Mac OS (Intel) (ver. 1.2.5)</p> <p style="padding-left:20px;">LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)</p> <p>For Mac OS (PowerPC) (ver. 1.2.4)</p> <p style="padding-left:20px;">LT265 / LT245 (Firmware version: 1.03 or later) / LT380 / LT280 / NP3150 / NP2150 / NP1150 / NP3151W / NP905 / NP901W / NP2000 / NP1000 / VT800* / WT610 (Firmware version: 1.00 or later)</p> <p> *The "Easy Connection" function cannot be used with VT800.</p>
Virtual Remote Tool is compatible with NP300/400/500/500W/600 models.
PC Control is designed to control a single projector, while PC Control Pro is designed to control multiple projectors.
The PC Control Utility or PC Control Pro can be connected from your computer to the projector using a serial or LAN connection.
<p class="medium_body"> <a href="#">PC Control Utility</a><br /> <a href="#">PC Control Utility Pro</a><br /> <a href="#">Virtual Remote Tool (limited compatibility)</a><br /> <a href="#">Image Express Utility (limited compatibility)</a><p>
Select "Lamp Mode" on the remote control and use the menu to select Eco-Mode.
Excessive moisture, dust, heat and smoke.
You're seeing the result of dust build-up on the green LCD panel. We recommend that you schedule a service visit. Please contact <a href="../../contact-support">NEC technical support</a> or your <a href="#">local NEC service provider</a> to set it up.
No, NEC only provides service support and parts to NEC authorized servicers and technicians. NEC-authorized service centers/technicians have attended training classes to ensure quality service on NEC products
Contact Sales Contact Support