Model: nec-kiosk-port-s
$7,629.00 USD
Silver Portrait Kiosk with touch 46" Monitor, WiFi OPS with Full Windows 8.1 with 3 YR On-Site Warranty.
  • NEC Portrait digital signage kiosk which offers unprecedented elegance in a large format kiosk.  This kiosk provides an NEC OPS PC with Wi-Fi, interactive touch monitor to create a complete interactive customer experience. Paired with 46" V463 display and OPS PC for digital signage.   NEC OPS with Window 8.1 and built in Wi-Fi, wired LAN, 4GB flash, SSD and USB ports simplifies digital signage like never before
  • LED backlighting technology reduces power consumption and allows for a slimmer cabinet depth
  • Full 1080p high-definition resolution provides stunning detail
  • Commercial-grade LCD panel and components enable extended run time
  • Expanded connectivity with digital loop-through.

Display

Panel Technology A-MVA Aspect Ratio 16:9
Native Resolution 1920 x 1080 Backlight Type LED Edge-lit
Brightness (maximum) 500cd/m2 Contrast Ratio (typical) 4000:1
Viewing Angle (typical) 178° Vert., 178° Hor. (89U/89D/89L/89R) @ CR>10 Refresh Rate 60Hz
Active Screen Area 40.1x 22.5in. /1018.1 x 572.7mm Orientation Landscape/Portrait
Displayable Colors More than 16.7 million  

Synchronization Range

Horizontal (Analog/Digital) 31.5-91.1 kHz  

Input Signal

Video Analog RGB 0.7 Vp-p/75 Ohms Sync Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)

Signal Compatibility/Connectivity

PC Signal Compatibility Yes Macintosh Signal Compatibility Yes
Video Analog RGB 0.7 Vp-p/75 Ohms Sync Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
Input Terminals
Digital:
DisplayPort, HDMI, DVI-D
Audio:
Stereo Mini-Jack, HDMI Audio, DisplayPort Audio
External Control:
RS-232C, Ethernet (RJ45), IR Remote, DDC/CI
Output Terminals
Digital:
DVI-D
Audio:
Stereo Mini-Jack, External Speaker Jack (2)
External Control:
RS-232C

Power Consumption (typical)

On 76W ECO Mode Standby <2W

Physical Specifications

Bezel Width (Left/Right, Top/Bottom) 0.7 in./0.7 in., 0.7 in./0.7 in. ; 18.3mm/18.3mm, 18.3mm/18.3mm Dimensions (WxHxD)
Net (with stand):
41.7 x 25.6 x 9.4in. / 1058.2 x 649.8 x 240.0mm
Net (without stand):
41.7 x 24.1 x 2.6in. / 1058.2 x 612.8 x 65.1mm
Shipping:
49.6 x 31.0 x 8.9 in. / 1260 x 788 x 225mm
Shipping:
52.7 lbs. / 23.9 kg
Weight
Net Weight (with stand):
44.5 lbs. / 20.2 kg
Net Weight (without stand):
41.7 lbs. / 18.9 kg
 

VESA Hole Configuration Specifications

300 x 300mm (4-hole)  

Environmental Conditions

Operating Temperature 41-104°F / 5-40°C Operating Humidity 20-80%
Operating Altitude 9843 ft. / 3000m Storage Temperature -4-140°F / -20-60°C
Storage Humidity 10-90% Storage Altitude 40,000 ft. / 12,192m\

Limited Warranty (parts & labor)

3 years  

Additional Features

  • Advanced thermal capabilities
  • Advanced cooling system
  • TileMatrix (10x10)
  • TileComp
  • Separate group/Monitor ID function
  • Ethernet Control and Communication
  • RS-232 Control and Communication
  • Carbon footprint meter
  • Plug and Play (DDC/CI, DDC2B)
  • Scheduler (w/ real-time clock)
  • Screen saver function
  • POP
  • Side-by-Side
  • Kensington lock
  • Touch- and protective screen-ready
  • Variable picture modes
  • Advanced video settings (Noise Reduction, Adaptive Contrast)
  • Input labeling
  • Backlight adjust
  • Aspect ratio control
  • Built-in speakers
  • OPS-Compliant slot
 

Contrast Ratio

4000:1  

Warranty Length: 3 years

  • Power cord
  • 1.8m DVI-D cable
  • Integrated computer (OPS-OPS-PCIB-PS)
  • Wireless remote control
  • Batteries
  • CD-ROM (user manual), Option board slot cover, Screws, Thumbscrews

Have a problem with your NEC Monitor? Here you'll find common questions. If you do not find a sufficient answer, please do not hesitate to contact us at 800-632-4662.

Large Screen Displays

The “Out Of Range” error message indicates that you have exceeded the maximum possible video resolution or horizontal & vertical frequency that your display device is capable of using. Lower your input resolution and horizontal/vertical frequency to one that is listed as compatible in the display device specifications chart.
<p>1. In Windows, right-click on the desktop.<br /> 2. Click on "Properties."<br /> 3. Click on the "Settings" tab. You can adjust your screen resolution with the slider bar or continue below for more advanced changes.<br /> 4. Click on the "Advanced" button.<br /> 5. Click on the "Adapter" tab. Choose your preferred refresh rate in the drop-down menu.<br /> 6. Click on "List All Modes" and choose your refresh rate.</p>
INF files are commonly known as drivers. Your operating system uses them to identify the monitor's name and resolution.<br /><br /> We recommend using the <a href="@@BASEURL@@monitor-installer">NEC Monitor Installer</a> for quick and easy installation of all your drivers.
A driver is software that controls a computer component or device, such as a display monitor. Drivers are specific to each device, and we recommend that you install the proper drivers using the NEC Monitor Installer.<br /><br /> Windows 2000, XP, Vista and later operating systems don't require drivers.
You can download drivers from the <a href="../../support-and-services">Support & Service</a> section of our site by searching for your specific model.
We recommend that you use the NEC Monitor Installer for quick, easy installation of all your drivers.
Visit the <a href="../../support-and-services">Support & Service</a> section of our site.
See your monitor's <a href="/trouble-shooting">user manual</a> for step-by-step guidance in changing of the screen's size and position.
Your computer's video card and its driver are limiting your options. We recommend installing the latest drivers for your video card.
Your computer's video card and its driver are limiting your options. We recommend installing the latest drivers for your video card.
<p>Your monitor settings are probably incorrect. To adjust them:</p> <p class="padding-top10">1. In Windows, right-click on the desktop.<br /> 2. Click on "Properties."<br /> 3. Click on the "Settings" tab.<br /> 4. Click on the "Advanced" button.<br /> 5. Click on the "Adapter" tab. Choose your new refresh rate from the drop-down menu.<br /> 6. Click on "List All Modes" and choose your refresh rate.</p>
This usually means the monitor isn't receiving a signal from your video card. Check that everything is properly connected. If you still do not see an image, reboot the system. If this continues after a reboot, call NEC Service & Support at 1-800-632-4662. (You can also verify that your monitor is not causing the problem by trying the monitor on a different system.)
Your monitor resolution is probably not set correctly. Check your display settings, or refer to your <a href="../../support-and-services">user manual</a> for auto adjustments.<br /><br /> The native resolution of a 15" LCD panel is 1024x768. Lower resolutions result in choppy-looking text and bold lines. To fix the problem, change the resolution the recommended 1024x768 setting.<br /><br /> The resolution of 18" and 21" LCD panels is 1280x1024. Resolutions lower than the pixel count of the LCD module result in choppy-looking text and bold lines. To fix the problem, change the resolution to the recommended 1280x1024 @ 60 Hz setting.
<p>In Windows:</p> <p class="padding-top10">1. Right click on the desktop.<br /> 2. Click on "Properties."<br /> 3. Choose the "Settings" tab. (You can adjust your screen resolution with the slider bar or continue below for more advanced changes.)<br /> 4. Click on the "Advanced" button.<br /> 5. Choose the "Adapter" tab.<br /> 6. Click on "List All Modes" and choose your refresh rate.</p>
Zip files are an easy way to archive, compress, transfer and copy files. To open a zip file, Windows users commonly use <a href="http://www.winzip.com" target="_blank">WinZip</a> while Mac users typically use <a href="http://www.apple.com/downloads/macosx/system_disk_utilities/stuffitexpander.html" target="_blank">StuffIt Expander</a>.
This may mean you don't have the correct drivers installed. Visit the Support & Service section of our site to download the right driver, or use the NEC Monitor Installer.
Clicking normally happens when a video graphics driver executes high-resolution programs. It's an expected function of the monitor's relays, and does not mean there is a problem with the monitor.
Because each monitor is different, we recommend that you refer to the <a href="../../../support-and-services">user manual</a> for your model.
<p style="padding-left:20px;">1. Open the On Screen Menu.<br /> 2. Go to the “Tools” tag. (If there are two tags, choose the second.) <br /> 3. Select the symbol under the “Tools" tag. (This is the Resolution Notifier setting.) <br /> 4. Use the left- and right-arrow buttons to turn the notifier off.</p>
<p>Windows 2000 & Later:</p> <p style="padding-left:20px;">1. Right-click on your desktop.<br /> 2. Choose Properties from the pop-up menu, then choose the Settings tab.<br /> 3. Use slider bar to change the resolution.</p> <p class="padding-top10">Mac OS X:</p> <p style="padding-left:20px;"> 1. From the Apple menu select System Preferences, then select Displays.<br /> 2. Within the "Display" tab, click on the "Detect Display" button. This will do a scan of the monitor information and list the resolutions supported by this monitor.<br /> 3. Choose your desired resolution.</p>
Because each monitor is different, we recommend that you refer to the <a href="../../support-and-services">user manual</a> for your model.
The NEC Professional 90 Series models with the letter "i" in the model use IPS panels.
All of our display products meet <a href="http://en.wikipedia.org/wiki/ISO_13406-2" target="_blank">ISO 13406-2 Class 2 specifications</a>, which allow for a certain number of "pixel faults" based on the total pixels in the monitor. (Pixel faults include whole pixels or sub-pixels going dark, staying permanently lit or flashing.)
Display Data Channel/Command Interface is a two-way communication link between the video graphics adapter and the display monitor. It uses the normal video signal cable, so no extra cables are necessary. All adjustments to the monitor settings are done automatically using this communications link.
Use a lint-free, microfiber cloth. If the dirt won't come off, add rubbing alcohol to the cloth and try again. Never use any cleaning solution or glass cleaner on your monitor.
High-Definition Multimedia Interface is an interface standard used for audiovisual equipment such as HDTV and home theater systems. With 19 wires wrapped in a single cable that resembles a USB wire, HDMI is able to carry more than twice the bandwidth needed to transmit multi-channel audio and video. HDMI fully preserves the source signal, delivering the sharpest, richest picture possible.<br /><br /> As a rule, HDMI cables should not run longer than 15 feet (5 meters), or degradation of the signal could occur.
RS232 external code commands can be found under the Products section, under the Downloads link.
5-pin BNC connector is the correct input for TileMatrix.
sRGB is a standard RGB (Red Green Blue) color space created cooperatively by HP and Microsoft for use on monitors, printers, and the Internet.<br /><br /> sRGB uses the ITU-R BT.709-5 primaries, the same as are used in studio monitors and HDTV,[1] and a transfer function (gamma curve) typical of CRTs. This specification allows sRGB to be directly displayed on typical monitors.<br /><br /> Unlike most other RGB color spaces, the sRGB gamma can not be expressed as a single numerical value. The overall gamma is approximately 2.2, consisting of a linear (gamma 1.0) section near black, and a non-linear section elsewhere involving a 2.4 exponent and a gamma (slope of log output versus log input) changing from 1.0 through about 2.3.
High-Bandwidth Digital Content Protection, developed by Intel, is a system for protecting content being transferred over DVI and HDMI from being copied. It's built into the circuitry of the source and the receiver of video devices. Most consumer electronics products now require HDCP support when DVI or HDMI inputs or outputs are used.
NEC Display does not provide IR code to our large screen public displays.
<p>The scheduler lets you set up to seven schedules for your display to automatically power on and off. To program a schedule:</P> <p class="padding-top10">1. Using the "Schedule" menu, choose "Schedule Setting" and choose a schedule number. When the box next to the number turns yellow, the schedule can be programmed.<br /> 2. Choose the input source, time to turn on and off, and how often the schedule should repeat. (Use the arrows to select each menu, and the + and – buttons to make each selection.)</P> <p class="padding-top20">Keep in mind that when schedules overlap, the schedule with the higher number takes priority. For example, Schedule #7 takes precedence over Schedule #1.</P>
Image persistence happens when a residual “ghost” image of a previous image remains on the screen. Image persistence is not permanent on LCD and plasma monitors. To prevent it, we recommend that you avoid displaying constant images for a long period of time. To learn more, read the <a target="_blank" href="/Documents/WhitePapers/Auto%20Dealerships%20Whitepaper%202.pdf">image persistence white paper (PDF)</a>.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. As with all personal display devices, we recommend displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle, or turning off the monitor when not in use.
This depends on the type of inputs coming from your DVD player or satellite/cable box. We recommend HDMI, which provides both digital picture and digital audio. If you aren't able to use HDMI, we recommend a component connection. Please check your DVD player or satellite/cable box for more information.
Contact Sales Contact Support