1. Home
  2. Products
  3. Discontinued Products
  4. Projectors
  5. 18,300-lumen Digital Cinema Projector

18,300-lumen Digital Cinema Projector

Discontinued
Model: NC2000C
Contact us for pricing and availability. Availability is limited and is not guaranteed.
Request Information
Designed for auditoriums with screens up to 65-feet wide, NEC's NC2000C DLP cinema projector captivates audiences with crisp video images. Delivering precise 2K (2048 x 1080) resolution, 3-D capabilities and high contrast images (2200:1), this model is easy to operate, extremely user-friendly and requires minimal maintenance.

Click here for more information about our Digital Cinema Solutions


  • 3D content utilizes the projector's full 2K resolution using triple flash technology for smooth motion
  • Memory functions for lens position and lamp output simplify frequent operation
  • Lamp changes can be made from the back of projector
  • Direct selection buttons for eight stored projector configurations
  • Auto lamp brightness control maintains constant brightness by adjusting the lamp power as it ages
  • Standard film projector lamps can be used (lamp adapter required)



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov

Display

Native Resolution 2048x1080 Contrast Ratio (typical) 2200:1 (full on/off)

Signal Compatibility/Connectivity

External Control LAN port [RJ-45] x 1 / USB port [Type A] x 1 / Serial port (RS-232C) [D-sub(9-pin) x 1 / General Purpose I/O [D-sub (37-pin)] x 1 / General purpose I/O for 3D (D-sub [15-pin] x 1) / Remote control connector x 1 Input Terminals
Input:
HD-SDI port [BNC] x 4 / DVI port [DVI-digital] x 2

Power Consumption (typical)

On Projector power supply unit: 500W
Lamp power supply unit: 5000W
Total: 5500W 		Power Supply Voltage C1 Connection
Projector and Lamp power supply unit:
200 to 240V AC, 50/60Hz, single phase
C2 Connection
Projector power supply unit:
100 to 240V AC, 50/60Hz,single phase
Lamp power supply unit: 200 to 240V AC, 50/60Hz, single phase

Physical Specifications

Dimensions (WxHxD)
External:
27.6 x 39 x 19.80 in. / 700 x 990 x 503mm
Excluding lens, lens hood and exhaust stack. Including feet.
Weight
Net Weight:
218 lbs. / 99 kg (excluding lens and lamp bulb) Lbs

Environmental Conditions

Environment Operational temperatures: 50-95°F / 10-35°C
Humidity: 10% - 85% (non-condensing)
Storage temperatures: 14-122°F / -10 50°C
Humidity: 10% - 85% (non-condensing) 		 

Limited Warranty (parts & labor)

2 years  

Optical

Light Output(Lumens) 18,300 lumens when using NEC 4.0KW highefficiency Xenon lamp bulb  

Mechanical

Fan Noise < 62dB Regulations USA: UL60950 FCC Class A / Canada: CSA60950 ICES-003 Class A /Europe: EN60950 EN55022 1988. Class A/EN55024-1998/EN61000-3-11/EN61000-3-12 (Marking: TUV-GS, CE) /Oceania: EN60950 AS/NZS3548 Class A 1995/+A 1/2:1997 / Japan: J60950 VCCI Class A (Marking PSE, S-TUV) /Asia: EN60950 CISPR Pub22 / Korea: K00022 Class A/K00024/K61000-3-11 (Marking IMC)

Accessories

Optional
  • Wide converter lens (NC-80LS13F)
  • Electric turret for NC-80LS13F
  • Built-in alternative content processor (MM3000B)
  • HDCP-compliant DVI input board (MM-70DV01)
  • Analog/RGB input board (MM-RGB)
  • Single HD-SDI input board (MM-SDI)
  • Video input board (MM-Video)
  • 6xA/filter with every lamp replacement (NC-80AF01)
  • 4xA/filter for exchange every 4000-5000 hours (NC-80AF02)
  • Lens 1.2-1.8 (NC-60LS12Z)
  • Lens 1.4-2.05 (NC-60LS13Z)
  • Lens 1.4-2.05 (NC-60LS14Z)
  • Lens 1.59-2.53 (NC-60LS16Z)
  • Lens 1.9-3.25 (NC-60LS19Z)
  • Lens 2.4-3.9 (NC-60LS24Z)
  • Lens 3.9-6.5 (NC-60LS39Z)
  

Projection Method

3-chip DMD reflection method  

Primary Lenses

For 0.98” DLP Chip: 1.3 to 1.75:1 zoom / 1.4 to 2.05:1 zoom / 1.59 to 2.53:1 zoom / 1.9 to 3.25:1 zoom / 2.4 to 3.9:1 zoom / 3.9 to 6.5:1 zoom  

Lens Adjustment Functions

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens  

Light Source

NEC high-efficiency Xenon (NEC 4.0KW lamp bulb / NEC Long life Xenon (NEC 4.0KW lamp bulb)  

Supported Screen Size (maximum)

65 ft. / 20m  

Cooling Method

  • Liquid cooling inside, air cooling with dustpreventing electrostatic filter
  • Total thermal dissipation: 18800BTU(Input 4KW power to NEC 4.0KW lamp bulb)
  • Projector exhaust: Top mounted
  • Demand of exhaust duct: 460CFM (13m3/min)
  

DMD Specifications

0.98” DLP chip, 12º tilt angle  
Optional 2K/4K Media Block
Internal design for content management, screen management and higher security.
Custom DMD shielding
Protects the projector from dust/oil contaminates and provides optimal picture quality.
3D Ready
When combined with active shutter glasses (NP02GL), this projector uses DLP Link™ technology, developed by Texas Instruments, to create 3D images.
Auto Lamp Brightness Contol
Maintains constant brightness of the lamp by adjusting the lamp power as the lamp ages.
Trouble-Free Lamp Replacement
Maintenance personnel can replace lamps simply from the back of the projector even in a cramped space.

Limited Warranty

Limited Warranty

Optional Lenses

Lens 1.4-2.05
Model: NC-60LS14Z
$4,998.00 USD
Learn More
Lens 1.59-2.53
Model: NC-60LS16Z
$4,553.00 USD
Learn More
Discontinued
Lens 1.9-3.25
Model: NC-60LS19Z
Contact Us or call for pricing: 866.771.0266
Learn More
Lens 2.4-3.9
Model: NC-60LS24Z
$4,506.00 USD
Learn More
Lens 3.9-6.5
Model: NC-60LS39Z
$5,691.00 USD
Learn More

Digital Cinema Projector Misc

Discontinued
Integrated Media Server
Model: NP-90MS02-4K
Contact Us or call for pricing: 866.771.0266
Learn More
  • User manual
Contact Sales Contact Support