(46”) Low Bright Ultra-Narrow 3x3 TileMatrix Video Wall Solution – Digital Pull-Out
MODEL: X462UN-TMX9P
NEC's complete 46" 3x3 LCD TileMatrix™ Digital Video Wall Solution delivers an all-in-one, easy-to-configure and cost-effective solution that is ideal for dynamic digital signage, information display and command & control applications. Exclusive TileMatrix and TileComp™ technologies combine with the ultra-narrow bezel of the NEC X462UN and the full adjustment capabilities of a Peerless-AV pull-out mount to allow for simple installation and easy access while servicing the video wall. The DVI daisy chain board is added to each display to allow the loop-through of a digital video signal, ensuring the best quality picture.
  • Ultra-thin bezel design (7.3mm screen-to-screen width) achieves a "barely there" effect
  • Overframe Bezel Kit completes the solution with a "finished and framed" look (two kits included)
  • EdgeComp™ technology provides for more even brightness distribution from center to edge during video wall configurations
  • TileMatrix technology is integrated into each NEC display within the bundle, allowing for easy manipulation of a single picture to 3x3 format
  • Copy function allows you to apply the settings from one display to all others
  • Tripp Lite Isobar6 surge suppressor features six outlets and prevents crashes, reboots and performance problems

 
 
 
Product Specifications
 
Display
 
 
 
Panel Technology SPVA (P-DID)
Viewable Image Size 46"
Native Resolution 1366 x 768
Pixel Pitch 0.75mm
Backlight Type CCFL
Pixels Per Inch 33@ native resolution
Brightness (typical) 500cd/m2
Viewing Angle 178° Vert., 178° Hor. (89U/89D/89L/89R) @ CR>10
Response Time(Gray to Gray) 8ms
Refresh Rate 60Hz
Aspect Ratio 16:9
Active Screen Area 40.1 x 22.5 in. / 1018.4 x 572.5mm=
Orientation Landscape/Portrait
Displayable Colors More than 16.7 million
 
 
Synchronization Range
 
 
 
Horizontal (Analog/Digital) 31.5-91.1 kHz
Vertical 50-85 Hz
 
 
Input Signal
 
 
 
Video Analog RGB 0.7 Vp-p/75 Ohms
Sync  Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
 
 
Connectivity
 
 
 
PC Signal Compatibility Yes
Macintosh Compatibility Yes
Input Terminals
Digital DisplayPort, HDMI, DVI-D
Analog VGA 15-pin D-sub, 5 BNC (RGBHV, DVD/HD or Video), RCA Composite, BNC Composite, RCA (Y, Cb/Pb, Cr/Pr) Component, S-Video
Audio RCA Audio (2), Stereo Mini-Jack, HDMI Audio
External Control RS-232C, Ethernet (RJ45), IR Remote, DDC/CI
 
Output Terminals
Analog 5 BNC (RGBHV), BNC Composite
Audio RCA Audio, External Speaker Jack (2)
External Control RS-232C, IR Remote
 
 
 
Power Consumption (typical)
 
 
 
On 200W (per display)
ECO Mode Standby <2W (per display)
 
 
Physical Specifications
 
 
 
Bezel Width (Left/Right, Top/Bottom) 0.2 in./0.1 in., 0.2 in./0.1 in. ; 4.6mm/2.7mm, 4.6mm/2.7mm (per display)
Dimensions (WxHxD)
Net (with stand) 40.4 x 24.6 x 13.8 in. / 1025.7 x 623.6 x 351mm (per display)
Net (without stand) 40.4 x 22.8 x 5 in. / 1025.7 x 579.8 x 128.1mm (per display)
Shipping 56.4 x 38.1 x 18.3 in. / 1433 x 968 x 464mm (per display)
 
Weight
Net (with stand) 68.8 lbs. / 31.2 kg (per display)
Net (without stand) 64.6 lbs. / 29.3 kg (per display)
Shipping 95.9 lbs. / 43.5 kg (per display)
 
 
 
VESA Hole Configuration Specifications
 
 
 
300 x 300mm (4-hole)
 
 
Environmental Conditions
 
 
 
Operating Temperature 41-104°F / 5-40°C
Operating Humidity 20-80%
Operating Altitude 9843 ft. / 3000m
Storage Temperature -4-140°F / -20-60°C
Storage Humidity 10-90%
Storage Altitude 40,000 ft. / 12,192m
 
 
Limited Warranty (parts & labor, including backlight)
 
 
 
3 Years Onsite Service for displays
 
 
Additional Features
 
 
 
  • Ultra-narrow bezel
  • Advanced thermal capabilities
  • Sealed panel design
  • Expansion slot
  • TileMatrix (10x10)
  • TileComp
  • Separate group/Monitor ID function
  • CableComp+
  • Ethernet Control and Communication
  • RS-232 Control and Communication
  • Landscape/portrait capable
  • Carbon footprint meter
  • Plug and Play (DDC/CI, DDC2B)
  • Scheduler (w/ real-time clock)
  • Sharpness/softness adjustment
  • Screen saver function
  • Ambient light sensor (AmbiBright)
  • Metal rear cabinet
  • POP
  • Side-by-Side
  • Kensington lock
  • Handles
  • Variable picture modes
  • Input labeling
  • Backlight adjust
  • Aspect ratio control
 
 
Ships With
 
 
 
  • (9) X462UN Display
  • (9) Peerless DS-VW765-LAND Video Wall Mounts and Spacers
  • (3) Tripp Lite Surge Suppressors
  • (9) DVI Daisy Chain Boards (SB-L008WU)
  • (8) 10ft. Null Modem Cables
  • (1) 5m DVI Cable
  • (1) KT-RC Remote Control and Ambient Light Sensor Kit
  • (3) Overframe Bezel Kits (KT-46UN-OF)
  • (1) Display Wall Calibrator Kit (KT-LFD-CC)
 
 
Accessories
 
 
 
Optional
NEC
  • Display Wall Calibrator Kit (KT-LFD-CC)
 
 
 
Back to Top

Find a Reseller

Request Information